Pioneer VSX-LX52 manual The Other Setup menu, 11The system and the other setup

11The system and the other setup

2Select either ON or OFF for THX Loudness Plus setting.

4a6.THX Audio Setting

A/V RECEIVER

Loudness Plus	:	ON
SB SP Position	:	1.2 m<
THX Select2 SW	:	YES
BGC	:	OFF
Exit			Finish

3Specify the distance of your surround back speakers from each other.

4a6.THX Audio Setting

A/V RECEIVER

Loudness Plus	:	ON
SB SP Position	:	1.2 m<
THX Select2 SW	:	YES
BGC	:	OFF
Exit			Finish

•0–0.3 m – Surround back speakers within 30 cm apart (best for THX surround sound).

•>0.3– 1.2 m – Surround back speakers between 30 cm and 1.2 m apart.

•1.2 m< – Surround back speakers more than 1.2 m apart (default).

4Specify whether your subwoofer is THX Select2 certified or not.

4a6.THX Audio Setting

A/V RECEIVER

Loudness Plus	:	ON
SB SP Position	:	1.2 m<
THX Select2 SW	:	YES
BGC	:	OFF
Exit			Finish

If your subwoofer isn’t THX Select2 certified, but you still want to switch boundary gain compensation on, select YES here, but the effect might not work properly.

5Select either ON or OFF for Boundary Gain Compensation setting.

4a6.THX Audio Setting

A/V RECEIVER

Loudness Plus	:	ON
SB SP Position	:	1.2 m<
THX Select2 SW	:	YES
BGC	:	OFF
Exit			Finish

6When you’re finished, press RETURN. You will return to the Manual SP Setup menu.

The Other Setup menu

The Other Setup menu is where you can make customized settings to reflect how you are using the receiver.

1Press RECEIVER on the remote control, then press

HOME MENU.

AGraphical User Interface (GUI) screen appears on your TV. Use /// and ENTER to navigate through the screens and select menu items. Press RETURN to confirm and exit the current menu.

2Select ‘System Setup’ from the HOME MENU.

3Select ‘Other Setup’, then press ENTER.

4.SystemSetup		4d.Other Setup
A/V RECEIVER		A/V RECEIVER
a.Manual SP Setup
		1. KURO LINK Setup
b. Input Setup		2. Multi Ch In Setup
c. OSD Language		3. ZONE Audio Setup
d. Other Setup		4. Power ON Level Setup
		5. Volume Limit Setup
		6. Remote Control Mode Setup
		7. Flicker Reduction Setup
Exit	Return	Exit	Return

4 Select the setting you want to adjust.

If you are doing this for the first time, you may want to adjust these settings in order:

•KURO LINK Setup – Synchronizes this receiver with your Pioneer component supporting KURO LINK (see KURO LINK Setup on page 58).

•Multi Ch In Setup – Specifies the optional settings for a multi-channel input (page 89).

•ZONE Audio Setup – Specifies the volume setting for a MULTI-ZONE setup (page 89).

•Power ON Level Setup – Specifies the volume level set when the power is turned on (page 90).

•Volume Limit Setup – Limits the maximum volume (page 90).

•Remote Control Mode Setup – Sets this receiver’s remote control mode (page 90).

•Flicker Reduction – Adjusts the way the GUI screen looks (page 90).

5Make the adjustments necessary for each setting, pressing RETURN to confirm after each screen.

88

En