Pioneer VSX-LX52 manual Connecting your equipment

Connecting your equipment 03

7 Audio/video source inputs/(outputs) (x5)

Use for connection to audio/visual sources, such as DVD players/recorders, VCRs, etc. Each set of inputs has jacks for composite video, S-Video and stereo analog audio.

See Connecting an HDD/DVD recorder, VCR and other video sources on page 27.

8Stereo analog audio source inputs/(outputs) (x3) Use for connection to audio sources such as CD players, tape decks, turntables, etc.

See Connecting other audio components on page 28.

9Multichannel analog audio inputs

7.1channel inputs for connection to a DVD player with multichannel analog outputs.

See Connecting the multichannel analog inputs on page 28.

10 Multichannel pre-amplifier outputs

Use to connect separate amplifiers for front, center, surround, surround back and subwoofer channels.

See Connecting additional amplifiers on page 29 (see also Installing your speaker system on page 19 for powered subwoofer connection).

11 AM and FM antenna terminals

Use to connect indoor or outdoor antennas for radio broadcasts.

See Connecting AM/FM antennas on page 30.

12 RS-232C connector

Use for connection to a PC for graphical output when using Advanced MCACC.

See Connecting a PC for Advanced MCACC output on page 34.

13 Control input/output

Use to connect other Pioneer components so that you can control all your equipment from a single IR remote sensor.

See Operating other Pioneer components with this unit’s sensor on page 33.

14 Remote inputs/output

Use for connection to an external remote control sensor for use in a MULTI-ZONE setup, for example.

See Connecting an IR receiver on page 33.

15 12 V trigger jacks (total 50 mA max.) (x2)

Use to switch components in your system on and off according to the input function of the receiver.

See Switching components on and off using the 12 volt trigger on page 34.

16 Speaker terminals

Use for connection to the main front, center, surround and surround back speakers.

See Connecting the speakers on page 18.

17 AC power inlet

Connect the supplied power cord here.

See Plugging in the receiver on page 37.

15

En