Pioneer VSX-LX52 manual USB interface, Additional information, Symptoms, Causes, Remedies

Additional information 12

USB interface

Symptoms

The folders/files stored on a USB memory device are not displayed.

Causes	Remedies
The folders/files are currently stored in a region	Store the folders/files in the FAT region.
other than the FAT (File Allocation Table) region.
The number of levels in a folder is more than 8.	Limit the maximum number of levels in a folder to
	8 (page 45).
There are more than 30 000 folders/files stored in	Limit the maximum number of folders/files stored
a USB memory device.	in a USB memory device to 30 000 (page 45).
The audio files are copyrighted.	Copyrighted audio files stored on a USB memory
	device cannot be played back (page 45).

A USB memory device is not recognized.

The USB memory device does not support the	Try using a USB memory device compatible with
mass storage class specifications.	the mass storage class specifications. Note that
	there are cases where even the audio files stored
	on a USB memory device compatible with the
	mass storage class specifications are not played
	back on this receiver (page 45).
	Connect the USB memory device and switch on
	this receiver (page 36).
A USB hub is currently being used.	This receiver does not support a USB hub
	(page 45).

This receiver recognizes the USB memory device Switch off and on again this receiver. as a fraud.

A USB memory device is connected and displayed, but the audio files stored on the USB memory device cannot be played back.

Some formats of a USB memory device, including	Check whether the format of your USB memory
FAT 12, NTFS, and HFS, cannot be played back on	device is either FAT 16 or FAT 32. Note that the FAT
this receiver.	12, NTFS, and HFS formats cannot be played back
	on this receiver (page 45).
The file format cannot be properly played back on	See the list of file formats that can be played back
this receiver.	on this receiver (page 47).

If the problem is not solved after the troubleshooting above, if the screen freezes unexpectedly or if the buttons on the remote control or front panel stop working completely, do the following:

•Press  STANDBY/ON on the front panel to turn off the power, then turn the power back on.

•If the power cannot be turned off, press and hold  STANDBY/ON on the front panel for over 10 seconds. The power will turn off. (In this case, the various settings made on the receiver may be cleared.)

99

En