JBL SDP-5, Home Theater System, 201 manual Anlg in LVL, Auto

SDP-5

SETUP

MAIN MENU

MODE ADJUST AUDIO CONTROLS SETUP

SETUP

INPUTS SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER

LOCK OPTIONS

INPUT SETUP

DVD1

DVD2

SAT

VCR

TV

CD

TUNER

AUX

DVD1 INPUT SETUP

NAME							DVD1
DIGITAL IN						COAX-1
ANALOG IN							NONE
ANLG IN LVL							+0dB
VIDEO IN					S-VIDEO-1
COMPONENT IN							1
2-CH							FILM
						L7
%!D			5.1				FILM
						L7
							FILM
						L7
DTS		DTS		-ES
	-ES
MAIN ADVANCED
ZONE2 IN						DIGITAL

DVD1 ANLG IN LVL

AUTOOFF

MANUAL+0dB

AUTO GAIN		+0.0dB
	L C R	SL SR SB LFE
dB
0

-6

-15X X X X X X X -30

-45

ON

OFF

The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted.

ANLG IN LVL

SETUP INPUTS DVD1 ANLG IN LVL

Opens the ANLG IN LVL menu shown above, which can be used to adjust 2-channel analog audio input levels for the selected input. Despite attempts at standardization, analog audio sources have a wide range of levels. To compensate for this, the SDP-5 allows independent input level adjustment for each of its stereo analog audio input connectors. Input level adjustment is not available for either of the 5.1-channel analog audio input connectors.

Note:

Adjustments made on the ANLG IN LVL menu are applied to the stereo analog audio input connector assigned for the selected input. When another stereo analog audio input connector is assigned, these adjustments are automatically applied to the new connector.

AUTO						ON, OFF
SETUP	INPUTS	DVD1	ANLG IN LVL	AUTO

Provides automatic adjustment of 2-channel analog audio input levels. When set to ON, the SDP-5 automatically monitors and optimizes input levels. When the input signal is too high, the SDP-5 quickly decreases input levels to avoid overload. When the input signal is too low, the SDP-5 slowly increases input levels to maximize the signal-to-noise ratio and dynamic range.

When the AUTO parameter is set to OFF, the SDP-5 does not provide automatic adjustment of 2-channel analog audio input levels. Rather, input levels must be adjusted with the ANLG IN LVL MANUAL parameter (next page).

. . . Assigning Audio & Video Input Connectors continues on page 3-10

3-9