JBL Home Theater System, SDP-5, 201 manual Video OSD

SETUP

JBL Synthesis

MAIN ADVANCED (continued from page 3-21)

MAIN MENU

MODE ADJUST AUDIO CONTROLS SETUP

SETUP

INPUTS SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER

LOCK OPTIONS

INPUT SETUP

DVD1

DVD2

SAT

VCR

TV

CD

TUNER

AUX

DVD1 INPUT SETUP

NAME							DVD1
DIGITAL IN						COAX-1
ANALOG IN							NONE
ANLG IN LVL							+0dB
VIDEO IN					S-VIDEO-1
COMPONENT IN							1
2-CH							FILM
						L7
%!D			5.1				FILM
						L7
							FILM
						L7
DTS		DTS		-ES
	-ES
MAIN ADVANCED
ZONE2 IN						DIGITAL

DVD1 MAIN ADV

INPUT SELECT	DIGITAL
2-CH ANLG BYP	OFF
S-VIDEO 16:9	AUTO
S-VIDEO OSD 4:3	ON
COMPONENT OSD	OFF

ON

OFF

The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted.

S-VIDEO OSD 4:3						ON, OFF
SETUP	INPUTS	DVD1	MAIN ADVANCED	S-VIDEO OSD 4:3

Controls the appearance of the on-screen display when the display device is connected to an S-video output connector. When set to ON, the display device shows the on-screen display in a 4:3 aspect ratio* regardless of the incoming signal. When set to OFF, the display device shows the on-screen display in the same aspect ratio as the input signal.

*Aspect ratio refers to the size of the picture on the display device screen or to the size of the display device screen. A 4:3 aspect ratio is almost square. A 16:9 aspect ratio, often referred to as “widescreen,” is almost twice as wide as high.

Note:

The on-screen display appears horizontally stretched across the display device screen when all of the fol- lowing conditions are met:

•The S-VIDEO OSD (4:3) parameter is set to OFF.

•An anamorphic video input signal is present.

•A 16:9 display device (widescreen) is connected to an S-video output connector.

3-22