JBL 201, SDP-5 manual Synthesis 7-CHANNEL Speaker Setups, THX ULTRA2 SUB OFF ON, OFF BGC ASA Apart

SDP-5

SETUP

MAIN MENU

MODE ADJUST

AUDIO CONTROLS

SETUP

When a THX speaker setup is selected, all CUSTOM SETUP menu parameters are automatically set to 80Hz. However, a custom speaker setup can still be configured with the CUSTOM SETUP menu.

SETUP

INPUTS

SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER

LOCK OPTIONS

SPEAKER SETUP

CUSTOM SETUP SYNTHESIS 7CH SETUP SPEAKER DISTANCES LEVELS CALIBRATION

		R	SR	RR
		80Hz	80Hz	80Hz
		C
		80Hz
	M	L	SL	RL
	SUB
80Hz		80Hz	80Hz	80Hz

SYNTHESIS 7CH SETUP

!CAUTION!

PRESSING THE V

BUTTON WILL

AUTOMATICALLY CHANGE

THE OUTPUTS TO A

SYNTHESIS

7CH SPEAKER

CONFIGURATION

SYNTHESIS 7CH SETUP

FRONT L/R*	80Hz
CENTER*	80Hz
SIDE L/R*	80Hz
REAR L/R	80Hz
SUBWOOFER*	80Hz
THX ULTRA2 SUB	OFF
BGC	N/A
ASA	APART

*These parameters cannot be adjusted.

SYNTHESIS 7-CHANNEL SPEAKER SETUPS

SETUP SPEAKERS SYNTHESIS 7CH SETUP

When the SPEAKER SETUP menu SYNTHESIS 7CH SETUP option is selected, the SYNTHESIS 7CH SETUP message shown above appears on the on-screen and front panel displays. When this message appears, press the remote control arrow to open the SYNTHESIS 7CH SETUP menu and configure the Main Zone audio output connectors for a JBL Synthesis 7-channel speaker setup or press the arrow to close the message without configuring the Main Zone audio output connectors for a JBL Synthesis 7-channel speaker setup.

When the SYNTHESIS 7CH SETUP menu opens, the Main Zone audio output connectors are configured for a JBL Synthesis 7-channel speaker setup. The SDP-5 ignores all CUSTOM SETUP menu parameter settings and applies an 80Hz crossover point with 24dB per-octave filter to all output connectors. This configuration is applied to all inputs and listening modes.

Note:

•A JBL Synthesis 7-channel speaker setup includes THX-certified loudspeakers. Use the CUSTOM SETUP menu to configure a custom speaker setup for systems that do not include THX-certified loudspeakers.

•A JBL Synthesis 7-channel speaker setup is not required to activate THX listening modes.

	Default	Possible
Parameter	Setting	Setting(s)
FRONT L/R*	80Hz	80Hz
CENTER*	80Hz	80Hz
SIDE L/R*	80Hz	80Hz
REAR L/R	80Hz	80Hz, NONE
SUBWOOFER*	80Hz	80Hz
THX ULTRA2 SUB	OFF	ON, OFF
BGC	N/A	ON, OFF
ASA	APART	TOGETHER, CLOSE, APART

* These parameters cannot be adjusted.

. . . Synthesis 7-Channel Speaker Setups continues on page 3-36

3-35