JBL SDP-5, Home Theater System, 201 manual Dts NEO6 Film, Dts NEO6 Music

MODE ADJUST

JBL Synthesis

dts NEO:6 FILM

MODE ADJUST FILM

•Designed for playback of matrix-encoded digital stereo film sources.

•Derives six channels when both side and rear speakers are present (rear channels will be in parallel). Derives five channels when only side or rear speakers are present. The subwoofer channel is generated through bass management in the SDP-5.

Option/

Parameter

OUTPUT LEVELS

CUSTOM

Listening mode menu option and parameter descriptions begin on page 5-28.

dts NEO:6 MUSIC

Please note the following about dts NEO:6 listening mode activation:

•The dts NEO:6 listening modes cannot be assigned as the preferred listening mode for 2-channel sources. However, when the 2-CH parameter is set to USE LAST, the SDP-5 will automatically activate a dts NEO:6 listening mode if a dts NEO:6 listening mode was activated the last time a 2-channel source was present.

•The SDP-5 will not automatically activate the dts NEO:6 listening modes unless a 44.1 or 48kHz PCM digital source is present. The dts NEO:6 listening modes are not available with 88.2 or 96kHz, Dolby Digital, or analog sources.

•The dts NEO:6 MUSIC listening mode can be activated with

the front panel or remote control Mode and buttons. The dts NEO:6 FILM listening mode can also be activated with the remote control dts button when a 2-channel input source is present.

MODE ADJUST

MUSIC

•Designed for playback of matrix-encoded digital stereo music sources.

•Derives six channels when both side and rear speakers are present (rear channels will be in parallel). Derives five channels when only side or rear speakers are present. The subwoofer channel is generated through bass management in the SDP-5.

Option/

Parameter

OUTPUT LEVELS

CUSTOM

Listening mode menu option and parameter descriptions begin on page 5-28.

5-8