JBL 201, SDP-5, Home Theater System manual Assigning Audio & Video Input Connectors from

SETUP

JBL Synthesis

Assigning Audio & Video Input Connectors (continued from page 3-7)

MAIN MENU

MODE ADJUST AUDIO CONTROLS SETUP

SETUP

INPUTS SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER

LOCK OPTIONS

INPUT SETUP

DVD1

DVD2

SAT

VCR

TV

CD

TUNER

AUX

DVD1 INPUT SETUP

NAME							DVD1
DIGITAL IN						COAX-1
ANALOG IN							NONE
ANLG IN LVL							+0dB
VIDEO IN					S-VIDEO-1
COMPONENT IN							1
2-CH							FILM
						L7
%!D			5.1				FILM
						L7
							FILM
						L7
DTS		DTS		-ES
	-ES
MAIN ADVANCED
ZONE2 IN						DIGITAL

DVD1 ANALOG IN

ANALOG-1

ANALOG-2

ANALOG-3

ANALOG-4

ANALOG-5

ANALOG-6

ANALOG-7

ANALOG-8

NONE

A

DVD1 ANALOG IN

ANALOG-1

ANALOG-2

ANALOG-3

ANALOG-4

ANALOG-5

5.1ANLG (6-8)

NONE

B

DVD1 ANALOG IN

ANALOG-1

ANALOG-2

5.1ANLG (3-5)

5.1ANLG (6-8)

NONE

C

The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted.

ANALOG IN ANALOG-1 to 8, 5.1 ANLG (3-5) or (6-8), NONE

SETUP INPUTS DVD1 ANALOG IN

Opens the ANALOG IN menu shown above, which can be used to assign an analog audio input connector for the selected input. The SDP-5 has eight configurable inputs, each of which can be assigned to any of its eight analog audio input connectors.

The appearance of the ANALOG IN menu depends on the configuration of the analog audio input connectors.

•The ANALOG IN menu labeled A (above) appears when the REAR PANEL CONFIG menu 8 STEREO INPUTS option (3-45) is selected.

•The ANALOG IN menu labeled B (above) appears when the REAR PANEL CONFIG menu 5 ST. & (1) 5.1 ANLG option (3-45) is selected.

•The ANALOG IN menu labeled C (above) appears when the REAR PANEL CONFIG menu 2 ST. & (2) 5.1 ANLG (3-46) option is selected.

Please note the following:

•When no analog audio input connector is assigned, the SDP-5 will automatically set the MAIN ADV menu INPUT SELECT parameter to DIGITAL (3-18).

•An analog audio input connector must be assigned when no digital audio input connector is assigned. Refer to the previous page for information about assigning a digital audio input connector.

3-8