JBL Home Theater System Digital, COAX-1 to 4, OPTICAL-1 to 4, None, Please note the following

SDP-5

SETUP

MAIN MENU

MODE ADJUST AUDIO CONTROLS SETUP

SETUP

INPUTS SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER

LOCK OPTIONS

INPUT SETUP

DVD1

DVD2

SAT

VCR

TV

CD

TUNER

AUX

DVD1 INPUT SETUP

NAME							DVD1
DIGITAL IN						COAX-1
ANALOG IN							NONE
ANLG IN LVL							+0dB
VIDEO IN					S-VIDEO-1
COMPONENT IN							1
2-CH							FILM
						L7
%!D			5.1				FILM
						L7
							FILM
						L7
DTS		DTS		-ES
	-ES
MAIN ADVANCED
ZONE2 IN						DIGITAL

DVD1 DIGITAL IN

COAX-1

COAX-2

COAX-3

COAX-4

OPTICAL-1

OPTICAL-2

OPTICAL-3

OPTICAL-4

NONE

The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted.

DIGITAL IN				COAX-1 to 4, OPTICAL-1 to 4, NONE
SETUP	INPUTS	DVD1	DIGITAL IN

Opens the DIGITAL IN menu shown above, which can be used to assign a digital audio input connector for the selected input. The SDP-5 has eight configurable inputs, each of which can be assigned to any of its eight digital audio input connectors.

Please note the following:

•When no digital audio input connector is assigned, the SDP-5 will automatically set the MAIN ADV menu INPUT SELECT parameter to ANALOG (3-18).

•A digital audio input connector must be assigned when no analog audio input connector is assigned. Refer to the next page for information about assigning an analog audio input connector.

Note:

The digital audio input connectors are compatible with PCM (44.1, 48, 88.2, and 96kHz), Dolby Digital, and dts(-ES) sources. The digital audio input connectors are not compatible with MPEG (MP3) sources.

. . . Assigning Audio & Video Input Connectors continues on page 3-8

3-7