JBL Home Theater System, SDP-5, 201 manual Front L/R, Default Possible Parameter Setting Settings

SETUP

JBL Synthesis

Custom Speaker Setups (continued from page 3-27)

MAIN MENU

MODE ADJUST AUDIO CONTROLS SETUP

SETUP

INPUTS

SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER

LOCK OPTIONS

SPEAKER SETUP

CUSTOM SETUP SYNTHESIS 7CH SETUP SPEAKER DISTANCES LEVELS CALIBRATION

		R	SR	RR
		80Hz	80Hz	80Hz
		C
		80Hz
	M	L	SL	RL
	SUB
80Hz		80Hz	80Hz	80Hz

CUSTOM SETUP

FRONT L/R	80Hz
CENTER	80Hz
SIDE L/R	80Hz
REAR L/R	80Hz
SUBWOOFER	80Hz
THX ULTRA2 SUB	OFF
BGC	N/A
ASA	APART

FRONT L/R SPEAKERS

FULL 30Hz 40Hz 50Hz 60Hz 70Hz 80Hz THX 80Hz 90Hz 100Hz 110Hz 120Hz

	Default	Possible
Parameter	Setting	Settings
FRONT L/R	80Hz	FULL, 30 to 120Hz, THX 80Hz
CENTER	80Hz	FULL, 30 to 120Hz, THX 80Hz,
		NONE
SIDE L/R	80Hz	FULL, 30 to 120Hz, THX 80Hz,
		NONE
REAR L/R	80Hz	FULL, 30 to 120Hz, THX 80Hz,
		NONE
SUBWOOFER	80Hz	FULL, 30 to 120Hz, THX 80Hz,
		NONE
THX ULTRA2 SUB	OFF	ON, OFF
BGC	N/A	ON, OFF
ASA	APART	TOGETHER, CLOSE, APART

FRONT L/R				FULL, 30Hz to 120Hz, THX 80Hz
SETUP	SPEAKERS	CUSTOM SETUP		FRONT L/R

Opens the FRONT L/R SPEAKERS menu shown above, which can be used to select a crossover point for the Main Zone audio output connectors labeled Front L/R. When set to FULL, the SDP-5 sends a full-range audio output signal to these connectors. Otherwise, the SDP-5 activates a crossover point at the selected setting. Choose the setting closest to the low-frequency rating of the associated speakers.

3-28