JBL SDP-5, Home Theater System, 201 manual Side L/R

SETUP

JBL Synthesis

Custom Speaker Setups (continued from page 3-29)

MAIN MENU

MODE ADJUST AUDIO CONTROLS SETUP

SETUP

INPUTS

SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER

LOCK OPTIONS

SPEAKER SETUP

CUSTOM SETUP SYNTHESIS 7CH SETUP SPEAKER DISTANCES LEVELS CALIBRATION

		R	SR	RR
		80Hz	80Hz	80Hz
		C
		80Hz
	M	L	SL	RL
	SUB
80Hz		80Hz	80Hz	80Hz

CUSTOM SETUP

FRONT L/R	80Hz
CENTER	80Hz
SIDE L/R	80Hz
REAR L/R	80Hz
SUBWOOFER	80Hz
THX ULTRA2 SUB	OFF
BGC	N/A
ASA	APART

SIDE L/R SPEAKERS

FULL 30Hz 40Hz 50Hz 60Hz 70Hz 80Hz THX 80Hz 90Hz 100Hz 110Hz 120Hz

NONE

SIDE L/R			FULL, 30Hz to 120Hz, THX 80Hz, NONE
SETUP	SPEAKERS	CUSTOM SETUP	SIDE L/R

Opens the SIDE L/R SPEAKERS menu shown above, which can be used to select a crossover point for the Main Zone audio output connectors labeled Side L/R. When set to FULL, the SDP-5 sends a full-range audio output signal to these connectors. Otherwise, the SDP-5 activates a crossover point at the selected setting. Choose the setting closest to the low-frequency rating of the associated speakers.

When set to NONE, the SDP-5 redirects side channel signals to the Main Zone audio output connectors labeled Rear L/R. If the CUSTOM SETUP menu REAR L/R parameter is also set to NONE, the SDP-5 redirects surround channel signals to the Main Zone audio output connectors labeled Front L/R.

Note:

When the SIDE L/R parameter is set to NONE, Dolby Digital Surround EX, THX Ultra2, THX Surround EX , and dts-ES decoding are not available.

3-30