JBL Home Theater System, SDP-5, 201 manual Input Select Parameter Settings, Digital Analog Auto

SDP-5

SETUP

INPUT SELECT Parameter Settings

The table below describes INPUT SELECT parameter settings.

DIGITAL	ANALOG		AUTO
The SDP-5 automatically sets the INPUT	The SDP-5 automatically sets the INPUT	The	SDP-5 automatically sets the INPUT
SELECT parameter to DIGITAL when the	SELECT parameter to ANALOG when the	SELECT parameter to AUTO when both digital
ANALOG IN parameter is set to NONE.	DIGITAL IN parameter is set to NONE.	and	analog audio input connectors are

•The SDP-5 sends the assigned digital • The SDP-5 sends the assigned analog assigned.

audio input connector to the Main Zone	audio input connector to the Main Zone	• The SDP-5 toggles between sending the
audio output connectors. The SDP-5	audio output connectors. The SDP-5	assigned digital and analog audio input
ignores the assigned analog audio input	ignores the assigned digital audio input	connectors to the Main Zone audio output
connector.	connector.	connectors based on the input source that
• The digital audio input connectors are •	The ANALOG IN parameter (3-8) can be	is present. For example:
compatible with PCM (44.1, 48, 88.2,	used to assign an analog audio input	– When a 2-channel PCM, Dolby Digital,
and 96kHz), Dolby Digital, and dts(-ES)	connector for the selected input.	or dts(-ES) source is present, the SDP-5
sources. If an incompatible digital audio		automatically selects		the	assigned
source (i.e. MPEG or MP3) is present, the		digital audio input connector.
SDP-5 automatically selects the assigned		– When an SACD source is present, the
analog audio input connector.
		SDP-5 automatically selects the
• The DIGITAL IN parameter (3-7) can be		assigned	analog	audio	input
used to assign a digital audio input		connector.
connector for the selected input.		• The AUTO setting is recommended for
		components that generate both digital
		and analog signals, such as DVD/SACD
		players.
		. . . MAIN ADVANCED continues on page 3-20

3-19