JBL 201 Specifications are subject to change without notice, Video Input & Output Connectors

SDP-5

Appendix

Video Input & Output Connectors

Video Inputs	•	5 composite (RCA), 5 S-video, and 3 component
		video (RCA)
Video Outputs	•	2 composite (RCA, 1 monitor and 1 Zone2), 2 S-video
		(1 monitor and 1 Zone2), and 1 component (RCA)

Composite & S-video Performance

Compatibility	•	NTSC, PAL, and SECAM
Switching	•	Active
Output Level	•	1.0V peak-to-peak
Impedance	•	75Ω
Input Return Loss	•	>40dB
Differential Gain	•	<0.5%
Differential Phase	•	<0.5°
Bandwidth	• >25MHz
K Factor	•	<0.3%
Gain	•	±0.15dB
Signal-to-Noise Ratio	•	>65dB
Frequency Response	•	10Hz to 10MHz + 0.1/-0.3dB

Component Video Performance (continued)

Insertion Loss	•	<3dB
Bandwidth	•	>150MHz

Other

Trigger Outputs	•	1 power on/off and 1 programmable connector on
		detachable screw terminals (+12 VDC, 0.5 amps each)
RS-232 Serial Input/	•	2 9-pin D-sub connectors
Output
Power Requirements	•	90-250 VAC, 50-60Hz, 60W (universal line input),
		detachable power cord
SDP-5	•	Height (with feet): 5.04 inches (128mm)
Dimensions & Weight	•	Width: 17.3 inches (440mm)
	•	Depth: 14.85 inches (377mm)
	•	Weight: 24lbs (10.7kg)
Rack Mounting	•	Brackets are provided for installation in a standard 19"
		equipment rack (3 rack units required).
Environment	•	Operating Temperature: 0° to 35°C (32° to 95°F)
	•	Storage Temperature: -30° to 75°C (-22° to 167°F)
	• Relative Humidity: 95% maximum without condensation
Remote Control	•	Hand-held, backlit infrared remote control unit
	• Requires 2 AA batteries (Alkaline batteries recommended)

Component Video Performance

Compatibility

• 3-channel (Y, Pr, Pb), format-independent

Switching

• Passive

Impedance

• 75Ω

Specifications are subject to change without notice.

A-3