JBL Home Theater System, SDP-5, 201 manual Rear L/R

SDP-5

SETUP

MAIN MENU

MODE ADJUST AUDIO CONTROLS SETUP

SETUP

INPUTS

SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER

LOCK OPTIONS

SPEAKER SETUP

CUSTOM SETUP SYNTHESIS 7CH SETUP SPEAKER DISTANCES LEVELS CALIBRATION

		R	SR	RR
		80Hz	80Hz	80Hz
		C
		80Hz
	M	L	SL	RL
	SUB
80Hz		80Hz	80Hz	80Hz

CUSTOM SETUP

FRONT L/R	80Hz
CENTER	80Hz
SIDE L/R	80Hz
REAR L/R	80Hz
SUBWOOFER	80Hz
THX ULTRA2 SUB	OFF
BGC	N/A
ASA	APART

REAR L/R SPEAKERS

FULL 30Hz 40Hz 50Hz 60Hz 70Hz 80Hz THX 80Hz 90Hz 100Hz 110Hz 120Hz

NONE

REAR L/R			FULL, 30Hz to 120Hz, THX 80Hz, NONE
SETUP	SPEAKERS	CUSTOM SETUP	REAR L/R

Opens the REAR L/R SPEAKERS menu shown above, which can be used to select a crossover point for the Main Zone audio output connectors labeled Rear L/R. When set to FULL, the SDP-5 sends a full-range audio output signal to these connectors. Otherwise, the SDP-5 activates a crossover point at the selected setting. Choose the setting closest to the low-frequency rating of the associated speakers.

When set to NONE, the SDP-5 redirects rear channel signals to the Main Zone audio output connectors labeled Side L/R. If the CUSTOM SETUP menu SIDE L/R parameter is also set to NONE, the SDP-5 redirects surround channel signals to the Main Zone audio output connectors labeled Front L/R.

Note:

When the REAR L/R parameter is set to NONE:

•Dolby Digital Surround EX, THX Ultra2, THX Surround EX, and dts-ES decoding are not available.

•The ASA parameter is not available.

. . . Custom Speaker Setups continues on page 3-32

3-31