JBL Home Theater System, SDP-5, 201 manual Rear Panel Config, Stereo Inputs, ST. & 1 5.1 Anlg

SETUP

JBL Synthesis

REAR PANEL CONFIG

SETUP

REAR PANEL CONFIG

Selecting the SETUP menu REAR PANEL CONFIG option opens the REAR PANEL CONFIG menu shown below, which can be used to configure the analog audio input connectors as eight stereo connectors, one 5.1-channel and five stereo connectors, or two stereo and two 5.1-channel connectors.

MAIN MENU

MODE ADJUST AUDIO CONTROLS SETUP

SETUP

INPUTS

SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER

LOCK OPTIONS

REAR PANEL CONFIG

8 STEREO INPUTS OR

5 ST. & (1) 5.1 ANLG OR

2 ST. & (2) 5.1 ANLG

8 STEREO INPUTS

SETUP REAR PANEL CONFIG 8 STEREO INPUTS

Configures the analog audio input connectors as eight stereo connectors, which is the factory-default configuration.

When the analog audio input connectors are configured as eight stereo connectors:

•All connectors are configured as stereo connectors.

•Neither of the 5.1-channel connectors is available. Sources that were assigned to the 5.1-channel connector labeled 3, 4, and 5 are reassigned to the stereo connectors labeled 3, 4, and 5. Sources that were assigned to the 5.1-channel connector labeled 6, 7, and 8 are reassigned to the stereo connectors labeled 6, 7, and 8.

5 ST. & (1) 5.1 ANLG

SETUP REAR PANEL CONFIG 5 ST. & (1) 5.1 ANLG

Configures the analog audio input connectors as one 5.1-channel and five stereo connectors.

When the analog audio input connectors are configured as one

5.1-channel and five stereo connectors:

•The connectors labeled 1, 2, 3, 4, and 5 are configured as stereo connectors.

•The connectors labeled 6, 7, and 8 are configured as a 5.1-channel connector. This connector is sent to the Main Zone audio output connectors as indicated in the table at the bottom of the next column.

3-46