JBL 201, SDP-5, Home Theater System manual Subwoofer

SETUP

JBL Synthesis

Custom Speaker Setups (continued from page 3-31)

MAIN MENU

MODE ADJUST AUDIO CONTROLS SETUP

SETUP

INPUTS

SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER

LOCK OPTIONS

SPEAKER SETUP

CUSTOM SETUP SYNTHESIS 7CH SETUP SPEAKER DISTANCES LEVELS CALIBRATION

		R	SR	RR
		80Hz	80Hz	80Hz
		C
		80Hz
	M	L	SL	RL
	SUB
80Hz		80Hz	80Hz	80Hz

CUSTOM SETUP

FRONT L/R	80Hz
CENTER	80Hz
SIDE L/R	80Hz
REAR L/R	80Hz
SUBWOOFER	80Hz
THX ULTRA2 SUB	OFF
BGC	N/A
ASA	APART

SUBWOOFER

FULL 30Hz 40Hz 50Hz 60Hz 70Hz 80Hz THX 80Hz 90Hz 100Hz 110Hz 120Hz

NONE

SUBWOOFER			FULL, 30Hz to 120Hz, THX 80Hz, NONE
SETUP	SPEAKERS	CUSTOM SETUP	SUBWOOFER

Opens the SUBWOOFER menu shown above, which can be used to select a crossover point for the Main Zone audio output connector labeled Subwoofer. When set to FULL, the SDP-5 sends a full-range audio output signal to this connector. Otherwise, the SDP-5 activates a crossover point at the selected setting. Choose the setting equal to the lowest setting of the other speakers.

Note:

When the SUBWOOFER parameter is set to NONE, subwoofer signals will not be redirected if the 5.1a BYPASS listening mode is activated. To redirect subwoofer signals, configure the speaker setup with the associated DVD-A/SACD player.

3-32