JBL 201, SDP-5, Home Theater System manual Size, Reset Mode, Rolloff, Sound Stage

MODE ADJUST

JBL Synthesis

Listening Mode Menu Option & Parameter Descriptions

SIZE 4 to 20 or 30m

(continued from page 5-33)

RESET MODE (continued)

MODE ADJUST (Listening Mode)

CUSTOM

RESET MODE

Adjusts the length of the listening space within a 4 to 20 or 30m range (depending on the listening mode). Increase the size of the space to increase the reverb effect.

CAUTION Setting the BASS RT, MID RT, and SIZE parameters to a high value may produce undesirable or damaging audio.

3. Press the Menu arrow to close the CUSTOM menu and return to the listening mode menu.

Note:

When the CUSTOM menu RESET MODE option is selected to restore the factory-default version of the selected listening mode, the corresponding TRIGGER SETUP menu listening mode parameter is automatically set to OFF.

ROLLOFF 500Hz to 20.0kHz, OFF

Simulates the absorption of high frequencies in a real space. It is recommended to begin with a low setting to simulate high-frequency absorbative spaces.

SIDE L/R				OFF, -30 to +12dB
MODE ADJUST	(Listening Mode)	OUTPUT LEVELS	SIDE L/R

Controls the output level of the Main Zone audio output connector labeled Side L/R.

SOUND STAGE FRONT, NEUTRAL, REAR

Dynamically controls the relative balance of the Main Zone audio output connectors. When set to FRONT, Side L/R and Rear L/R output levels are attenuated by 6dB, shifting the perceived balance of the sound field to the front of the listening space. When set to NEUTRAL, Side L/R and Rear L/R output levels are slightly attenuated by 3dB, shifting the perceived balance of the sound field to the center of the listening space. When set to REAR, Side L/R and Rear L/R output levels are not attenuated, preserving the intended balance of the sound field.

SOURCE	RIGHT, LEFT & RIGHT, LEFT
Refer to page 5-12.
SPEAKER ANGLE	10 to 90deg
Refer to page 5-12.

5-34