Resetting the Camera
If your camera does not respond when you press any buttons, try resetting the camera as follows:
1.Turn off the camera.
2.If you have an optional memory card installed, remove it. (Although removing an optional memory card is not necessary for performing the reset, it eliminates the memory card as a possible cause of the problem.)
3.Remove all power (batteries and AC power) from the camera for at least 5 seconds.
4.Reinsert the batteries and close the Battery/Memory card door, and/or reconnect the HP AC power adapter to the camera.
5.After verifying that the camera works without an optional memory card, reinsert the card, if you have one.
When you reset the camera, the camera settings will return to the factory defaults. Any images stored in memory will be retained.
HP Image Zone Software
The HP Image Zone software provides several features that enhance your camera’s capabilities. With the full version of the HP Image Zone software, you can use HP Instant Share to
