Printing Images Directly from the Camera
You can connect the camera directly to any
1.Check that the printer is turned on. There should be no blinking lights on the printer or error messages displayed about the printer. Load paper into the printer, if needed.
2.Connect your camera to the printer.
a. Make sure the camera’s USB Configuration setting is set to Digital Camera (see USB Configuration on page 90).
b. Using the USB cable that came with your
camera, connect the larger, flat end of the USB cable to the corresponding connector on the PictBridge- certified printer.
TIP: The PictBridge connector is usually located on the front of the printer.
3.Open the rubber door on the side of the camera and connect the small end of the USB cable to the USB connector on the camera.
Transferring and Printing Images | 81 |
