HP M415 manual Recharging NiMH Batteries

Recharging NiMH Batteries

NiMH batteries can be recharged in the camera when the camera is connected to an optional HP AC power adapter or HP Photosmart M-series dock. NiMH batteries can also be recharged with the optional HP Photosmart Quick Recharger. For information about these optional accessories, see Appendix B, Purchasing Camera Accessories, starting on page155.

When the HP AC power adapter is used to charge the batteries and the camera is off, the Power light on the back of the camera will blink during charging. When the dock is used, the dock light will blink. When the quick recharger is used, the light on the quick recharger will be red to indicate charging.

The following table shows the average time it takes to recharge NiMH batteries that have been fully discharged, depending on where the batteries are being charged. The table also notes the signal you will see when the batteries have been recharged.

Where batteries	Average	Signal when charging has
are charged	charge time	completed
In camera with	12 to15	If the camera is off, the power
HP AC power	hours	light on the camera stops blinking
adapter		and turns off. If the camera is on
connected		with the Image Display on, the
		icon appears.

150 HP Photosmart M415 User’s Manual