Message

Possible Cause

Solution

 

 

 

NOT ENOUGH

The light is low

Add light to the scene.

LIGHT FOR FAST

and the image is

(Flash is set to Flash Off in

SHOT

likely to be noisy

Fast Shot mode.)

 

due to the small

 

 

aperture setting

 

 

used in Fast Shot

 

 

mode.

 

 

 

 

 

The light is low

Use the flash (see

 

and the image is

page 40), set the camera

(camera shake

likely to be blurry

on a stable surface, or use

warning)

due to the long

a tripod.

 

exposure

 

 

required.

 

 

 

 

ERROR SAVING

The optional

• Always wait until the

IMAGE

memory card that

Memory light stops

or

is installed was

blinking before

ERROR SAVING

half-locked or

removing the memory

VIDEO

was removed

card from the camera.

 

before the

• With the camera

 

camera finished

turned off, remove the

 

writing to the

memory card and

 

card.

check to see if the

 

 

locking tab on the

 

 

edge of the card is fully

 

 

in the unlocked

 

 

position.

 

 

 

Troubleshooting and Support 127