JBL 201, SDP-5, Home Theater System Level Meters, Video, COMPOSITE-1 to 5, S-VIDEO-1 to 5, None

SDP-5

SETUP

MAIN MENU

MODE ADJUST AUDIO CONTROLS SETUP

SETUP

INPUTS SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER

LOCK OPTIONS

INPUT SETUP

DVD1

DVD2

SAT

VCR

TV

CD

TUNER

AUX

DVD1 INPUT SETUP

NAME							DVD1
DIGITAL IN						COAX-1
ANALOG IN							NONE
ANLG IN LVL							+0dB
VIDEO IN					S-VIDEO-1
COMPONENT IN							1
2-CH							FILM
						L7
%!D			5.1				FILM
						L7
							FILM
						L7
DTS		DTS		-ES
	-ES
MAIN ADVANCED
ZONE2 IN						DIGITAL

VIDEO IN

COMPOSITE-1 COMPOSITE-2 COMPOSITE-3 COMPOSITE-4 COMPOSITE-5 S-VIDEO-1 S-VIDEO-2 S-VIDEO-3 S-VIDEO-4 S-VIDEO-5

NONE

The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted.

LEVEL METERS

SETUP INPUTS DVD1 ANLG IN LVL

Indicate fluctuating input levels in the front left (L) and front right

(R)channels for the selected input. These level meters are also included on the STATUS menus, allowing them to indicate input levels for both analog and digital audio input sources. However, ANLG IN LVL menu input level adjustments only affect 2-channel analog audio input sources.

Level meters appear in combinations of green, yellow, and red when the on-screen display is configured for a blue-screen back- ground. Green indicates low levels, yellow indicates normal levels, and red indicates the onset of overload. Level meters appear in white when the on-screen display is not configured for a blue- screen background.

VIDEO IN				COMPOSITE-1 to 5, S-VIDEO-1 to 5, NONE
SETUP	INPUTS	DVD1	VIDEO IN

Opens the VIDEO IN menu shown above, which can be used to assign a composite or S-video input connector for the selected input. The SDP-5 has eight configurable inputs, each of which can be assigned to any of its five composite or five S-video input connectors.

Please note the following:

•Composite video output connectors are available when a composite or S-video source is present.

•S-video output connectors are available when an S-video source is present.

•Component video output connectors are available when a component video source is present.

. . . Assigning Audio & Video Input Connectors continues on page 3-12

3-11