JBL 201, SDP-5, Home Theater System manual Dts-ES Decoding, Channel dts

MODE ADJUST

JBL Synthesis

dts-ES DECODING

The table below indicates the conditions in which dts-ES decoding is engaged.

•dts-ES decoding is engaged when the ES DECODING parameter is set to ON, or the ES DECODING parameter is set to AUTO and a 5.1-channel matrix-encoded or 6.1-channel discrete-encoded dts-ES source is detected.

•dts-ES decoding is not engaged when the ES DECODING parameter is set to OFF, or the ES DECODING parameter is set to AUTO and a 5.1-channel dts source is detected.

•Listening mode names differ depending on the encoding present in the input source, the ES DECODING parameter setting, and the speaker setup.

–dts-ES listening modes are available when dts-ES decoding is engaged.

–dts listening modes are available when dts-ES decoding is not engaged.

–dts-ES listening modes cannot be activated unless both side and rear speakers are present.

Note:

The table below is not applicable to the dts-ES THX, dts THX ULTRA2, and dts THX MUSIC listening modes.

	Input	5.1-Channel dts	5.1-Channel	6.1-Channel
Parameter	Source
			Matrix-Encoded dts-ES	Discrete-Encoded dts-ES
Setting
ES DECODING: AUTO		dts	dts-ES	dts-ES
ES DECODING: ON		dts-ES	dts-ES	dts-ES
ES DECODING: OFF		dts	dts	dts

5-22