JBL 201 Command Bank Activation, Command Matrix, To activate the Zone 2 or Shift command bank

SDP-5

Basic Operation

COMMAND BANK ACTIVATION

Remote control buttons perform different commands depending on whether the Main Zone, Zone 2, or Shift command bank is activated. The Main Zone command bank does not need to be activated. It remains activated unless the Zone 2 or Shift command bank is activated. Pressing and holding the remote control Zone 2 button activates the Zone 2 command bank, and pressing and holding the remote control Shift button activates the Shift command bank.

The Zone 2 and Shift buttons themselves do not send commands to the SDP-5. When pressed and held, these buttons activate the associated command bank. For instance, pressing the remote control Off button deactivates the SDP-5. Pressing and holding the Zone 2 button while pressing the Off button deactivates Zone 2. And, pressing and holding the Shift button while pressing the Off button deactivates the Main Zone.

To activate the Zone 2 or Shift command bank:

1.Press and hold the remote control Zone 2 button to activate the Zone 2 command bank or press and hold the Shift button to activate the Shift command bank.

2.While holding the selected button, press the desired remote control button to send the associated command to the SDP-5. The command matrix that begins on the next page describes the commands remote control buttons perform when each command bank is active.

3.Release the Zone 2 or Shift button to deactivate the associated command bank.

The ON-SCREEN DISPLAY menu REMOTE STATE parameter (3-51) controls the remote control command bank indicator that appears on the on-screen display. When the REMOTE STATE parameter is set to ON, a command bank indicator appears in the top-right corner of the on-screen display to indicate the last command bank from which the SDP-5 received a command. When the REMOTE STATE parameter is set to OFF, no command bank indicator appears on the on-screen display.

A "Z" appears when a command from the Zone 2 command bank was received last. An "S" appears when a command from the Shift command bank was received last. No letter appears when a command from the Main Zone command bank was received last.

COMMAND MATRIX

The command matrix that begins on the next page describes the commands remote control buttons perform when each command bank is active. The numbers in the SDP-5 remote control illustrations that also begin on the next page correspond to the numbered items in the matrix.

2-11