Bunn LCC-2 service manual Rinse Alarm Feature, Disabled None, Serve product

Page 11

Rinse Alarm Feature

Periodic rinsing of the mix chambers and dispense tips is essential for proper maintenance and optimum performance of the dispenser. The automated Rinse Alarm feature has two levels of operation, Disabled and Warning.

Alarm Level Selected

Alarm Mode

Disabled

None

Warning

Rinse LED will come on 4 hrs prior to the selected time interval and remain on

 

until the Rinse procedure has been performed. The dispenser will continue to

 

serve product.

NOTE: The time interval between Rinses is adjustable from 0 to 24 hrs.

The dispenser is shipped with the automated Rinse Alarm disabled, (No Alarm). It is up to the user to determine the Rinse time interval and the level of warning required, based on their application and maintenance procedures. To enable the automated Rinse Alarm feature, refer to RINSE ALARM in Programming the Dispenser.

Rinse Procedure:

1.Open the cabinet door and select Rinse on the Function Selector switch – close the door.

2.Place a 2 Liter (1/2 Gal) container under the Left dispense tip.

3.Press and hold the Left dispenser until water flow stops automatically, approximately 20 sec.

4.Repeat Steps 2 & 3 for the Right dispense tip.

NOTE: The Rinse LED will turn OFF, when the Rinse procedure has been satisfied for both sides. 5. Open the cabinet door and select Normal on the Function Selector switch – close the door.

5 1

11

39288 040208

 

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Phone 217 529-6601 FAX 217 LCC-2 LPBUNN-O-MATIC Commercial Product Warranty Contents 40054.0000 User Notices00656.0001 00986.0002 00824.0002 37881.0000 11646.0002 Plumbing Requirements IntroductionElectrical Requirements Turn on the water supply and check for leaks Initial SET-UPPlumbing HOOK-UP Early Models Plumbing HOOK-UP Late ModelsOperating Controls and Interface Electrical HOOK-UP39288 Installing the Pump Tubing Installing Pump TubingInitial Fill & Heat Serve product Rinse Alarm FeatureDisabled None LCD Display Display Mode Description1 8 Programming the DispenserLC x Programming the Dispenser Display Mode0 0 6 0~5.5C Program Mode DescriptionTank Temperature Default = 180F 82C Range = 120 200F 49 93C Programming the DispenserProgram Function  DESCRIPTION Programming the Dispenser Program ModeLCD Display Program Mode Description LC 0 xDraining the HOT Water Tank Priming the Concentrate LinesOperating the Dispenser General Cleaning and Sanitizing Procedures Daily Rinsing Cleaning & Preventative MaintenanceReplacing the Pump Tubing Preventive MaintenanceC2 2 C1 r u nC1 2 C2 r u nC6 2 0 C4 1C5 0 6 C5 CHLEC 0 0 Troubleshooting GuideError Codes Error0 1 Troubleshooting Guide Error CodesDESCRIPTION/TROUBLESHOOTING Decaffeinated Coffee Right Concentrate Pump Calibration Decaffeinated Coffee Right Dispenser Flow Rate Calibration J4-5 LCC-2 LP Bunn Chilled
Related manuals
Manual 34 pages 56.59 Kb Manual 36 pages 62.09 Kb

LCC-2 specifications

The Bunn LCC-2, LCA-2 PC, and LCA-2A are high-performance commercial coffee brewers designed to meet the demands of busy coffee shops, restaurants, and other food service establishments. These machines are known for their efficiency, durability, and advanced brewing technologies, making them popular choices in the industry.

Starting with the Bunn LCC-2, this brewer is recognized for its compact design and ease of use. It has a brewing capacity of up to 3.8 gallons per hour, ensuring that coffee is ready quickly during peak hours. The LCC-2 uses a pour-over brewing method, which means that water is heated to the ideal brewing temperature and then poured over coffee grounds for optimal extraction. One of its standout features is the digital temperature control, which allows operators to adjust brewing temperatures easily for different coffee types. Additionally, the Bunn LCC-2 features a stainless steel construction that enhances durability and provides a sleek look for any commercial kitchen.

Moving on to the Bunn LCA-2 PC, this model includes programmable capabilities, making it perfect for establishments that require consistency and convenience. The LCA-2 PC allows users to preset brewing schedules and customize brew cycles, ensuring that each pot of coffee meets specific flavor profiles. This model is designed with a large-capacity brewing system that can produce up to 7.5 gallons of coffee per hour, making it an ideal choice for high-demand environments. It also boasts a built-in hot water faucet, which provides instant hot water for other beverages or culinary applications. The LCA-2 PC's advanced brewing automation helps maintain optimal brew quality while minimizing waste.

Lastly, the Bunn LCA-2A is an advanced version that focuses on automation and efficiency. This brewer features a state-of-the-art digital brew timer, which allows precise control over brew times, leading to consistent flavor extraction. The LCA-2A also integrates with Bunn’s patented brewWISE technology, which tracks brew recipes and monitors performance. The intuitive interface allows for easy operation, even for staff who may be less experienced with coffee brewing. With a capacity of up to 4 gallons per hour and a durable stainless steel frame, the LCA-2A ensures longevity while delivering exceptional coffee.

In summary, the Bunn LCC-2, LCA-2 PC, and LCA-2A represent the pinnacle of commercial coffee brewing technology. Their unique features, including programmable settings, large brewing capacities, and durable constructions, cater to the diverse needs of the food service industry. Each model emphasizes convenience, flexibility, and quality, making them invaluable assets in any professional coffee environment.
Top Page Image Contents