Bunn JDF-4S manual Contents

Page 2

CONTENTS

 

Introduction & Warranty

2

User Notices

3

Initial Set-Up & Electrical Requirements

4

Plumbing Requirements

4

Door Cover Installation

5

Plumbing Hookup

6

Initial Fill

6

Loading & Priming

7

Operating Controls

8

Dispenser Use

8

Cleaning

10

Adjustments & Optional Settings

12

Function Lists

15

Troubleshooting

16

Coolant Diagram

22

Schematic Wiring Diagram

23

Quick Setup Guide

24

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY

 

Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:

1)All equipment other than as specified below: 2 years parts and 1 year labor.

2)Electronic circuit and/or control boards: parts and labor for 3 years.

3)Compressors on refrigeration equipment: 5 years parts and 1 year labor.

4)Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes first.

These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.

If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.

THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.

In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.

BUNN, JDF-2S, JDF-2SA, JDF-4S and JDF-4SA are either trademarks or registered trademarks of Bunn-O-Matic Corporation.

39992 042007

Image 2
Contents JDF-2S JDF-4S Phone 217 529-6601 FAX 217Contents 00656.0000 12559.0003 User Notices27442.0000 33461.0001Plumbing Requirements Initial SET-UPElectrical Requirements Electrical HOOK-UPSecure the door cover using 5 screws provided Door Cover InstallationInstall door cover Initial Fill Plumbing HookupPlumbing Connections JDF-2S Plumbing Connections JDF-4S Initial Fill Hose JDF-2S Initial Fill Hose JDF-4SInitial Fill Frozen Concentrates LoadingPriming Ambient Concentrates OptionalDispenser USE Refrigeration SwitchOperating Controls Operating Controls Portion Control OptionTemperature LEDs JDF-4S Daily Parts Washing Cleaning & Preventive MaintenanceDaily Rinse Procedure Weekly Semi-Automatic Sanitize ProcessOpen dispenser door Cleaning Monthly Clean Condenser CoilsAnnually Replace Pump Tubing Pump Speed Adjustment Adjustment & Optional SettingsWater Flow Testing and Adjustment Mix RatioAdjustment & Optional Settings Temperature Compensated Refractometer MethodAdjustment & Optional Settings Dispenser Lockout LED # Circuit Board LED Indicators JDF-2SFunction List LED Color IlluminatesFunction List Circuit Board LED Indicators JDF-4S JDF-4SProbable Cause TroubleshootingProblem RemedyRefrigeration TroubleshootingCompressor ON/OFF switch Dirty condenser filter or fins Space around machineProblem Probable Cause Remedy Concentrate only Water onlyTray Initial fill/setupNect fittings Water pressure greater thanProblem Probable Cause Coolant Schematic Diagram Schematic Wiring Diagram JDF-2S Schematic Wiring Diagram JDF-4S Quick Setup Guide JDF-2S and JDF-4S JDF-2S shown Machine door
Related manuals
Manual 28 pages 48.61 Kb Manual 31 pages 40.19 Kb Manual 57 pages 43.05 Kb