Extron electronic MTP 15HD manual Edid Configuration, Recording a Display Edid

Page 19

EDID Configuration

The MTP 15HD RS transmitter can either record EDID from a display device, or a pre-programmed EDID can be selected using the rotary and DIP switches.

Recording a Display EDID

1.Turn the rotary switch to position 0.

NOTE: The vertical frequency DIP switch has no effect in this mode.

2.Connect the display device to the local monitor output connector.

NOTE: The MTP 15HD transmitter should be supplying the necessary 5 VDC to power on the display. However, to ensure that EDID is being transmitted, power on the display.

3.When ready to record to memory, press and release the recessed record button (see

C on figure 2 on page 6) to begin the recording process. The Record LED (see B on figure 2 on page 6) will flash red rapidly during recording, then return to solid green after recording is completed. At this time, the display can be disconnected. Connect the source device to the input connector.

4.Power on or restart the source device if necessary.

Using a Pre-Programmed or User-Recorded EDID

1.If you have not already done so, connect the source device to the MTP 15HD transmitter. Do not power on the source device at this time.

2.Set the front panel DIP switch (see D on figure 2 on page 6) to the required frequency (50 or 60 Hz).

3.Set the rotary dial (see E on figure 2 on page 6) to the required position (see the table in figure 12). Positions 1 through E are factory installed. Position 0 is for user-recorded EDID information. Position F passes the EDID from the display connected to the loop-out directly back to the input.

Rotary Switch

Resolution

Position

 

 

 

0

User-recorded EDID

 

 

1

800x600

 

 

2

1024x768 (default)

 

 

3

1280x720

 

 

4

1280x768

5

1280x800

 

 

6

1280x1024

 

 

7

1360x768

 

 

8

1366x768

 

 

9

1400x1050

A

1400x900

 

 

B

1600x1200

 

 

C

1680x1050

 

 

D

1920x1080

 

 

E

1920x1200

F

Local monitor pass-through

 

 

Figure 12. EDID Settings Table

MTP 15HD RS Series • Installation and Operation

15

Image 19
Contents User Guide Safety Instructions English FCC Class a Notice Specifications AvailabilityContents About this Guide IntroductionAbout the MTP Transmitters and Receivers Twisted Pair Cable Advantages Transmission Distance MTP 15HD RS Series Introduction Installation Installation OperationInstallation and Operation Overview Pre-Installation RS-232 JumperMTP Front Panels Front Panel FeaturesMTP 15HD RS Series Installation and Operation Transmitter Rear Panel Transmitter Rear Panel FeaturesMTP 15HD RS Series Installation and Operation Receiver Rear Panel Receiver Rear Panel FeaturesReceiver DIP Switch Settings Potential damage to property Power Supply WiringTwisted Pair Cable Termination Twisted Pair Cable Termination DiagramSEQ Receiver Skew Compensation Skew Delay CompensationNon-SEQ Receiver Skew Compensation Using a Pre-Programmed or User-Recorded Edid Edid ConfigurationRecording a Display Edid Part Numbers Part Numbers, Optional Accessories, Cables, and ConnectorsOptional Accessories Reference InformationRJ-45 Connectors ConnectorsCables Rack Mounting Tabletop PlacementMounting Under Desk and Furniture MountingBack of the Rack Mounting Procedure Rack Mounting ProcedureProjector Mounting Extron Warranty
Related manuals
Manual 25 pages 58.81 Kb

MTP 15HD specifications

Extron Electronics is known for its innovative solutions in audio-visual technology, and the MTP 15HD stands out as a versatile and efficient solution for video signal distribution. The MTP 15HD is part of Extron’s series of Media Transport Products, designed specifically for applications that require high-definition video transmission over long distances.

One of the main features of the MTP 15HD is its ability to transmit HD video signals up to 1920x1200 resolution, ensuring stunning picture quality for professional environments. It supports various video formats, including RGBHV, component video, and composite video, allowing for compatibility with a wide range of devices. This versatility makes it ideal for use in educational institutions, corporate environments, and control rooms where flexibility is key.

Another notable technology employed in the MTP 15HD is its use of twisted pair cable, which facilitates long-distance transmission. By utilizing Extron’s proprietary HDMI technology, the MTP 15HD can deliver video signals up to 300 feet (91 meters) over a single CATx cable, minimizing signal degradation and ensuring reliable performance. This feature significantly reduces installation costs associated with traditional coaxial cabling methods.

The MTP 15HD also incorporates advanced signal processing technology, allowing it to automatically adjust to the signal quality, optimizing performance for the source device and the output display. This adaptive feature ensures that users experience the best possible video quality without manual intervention.

Another advantage of the MTP 15HD is its user-friendly design. The device is compact and rack-mountable, making it suitable for both permanent installations and portable applications. It also supports hot-swappable operation, allowing users to replace or add devices without interrupting the signal flow.

Overall, the Extron MTP 15HD stands as a robust solution for high-definition video signal distribution. Its combination of high-resolution support, extensive range capabilities, and versatile input options make it an essential component for any advanced audio-visual setup. Whether for corporate presentations, education, or broadcasting, the MTP 15HD enhances connectivity and delivers exceptional performance, embodying Extron's commitment to quality and innovation in the AV market.