Twisted Pair Cable Advantages

The RS-232 portion of the twisted pair link:

•• Can be bidirectional in a one-receiver system; that is, the receiver can receive commands from the transmitter and pass RS-232 responses to the transmitter.

NOTE: By default, the RS-232 portion of the twisted pair link is unidirectional only from the transmitter to the receiver. Use the internal jumpers in the receiver to enable bidirectional communication in a single-receiver system only (see "Pre-Installation — RS-232 Jumper" on page 5).

•• Supports software flow control (XON, XOFF).

NOTE: Hardware flow control is not supported.

•• Supports full duplex and half duplex operation.

•• Supports any baud rate (up to 38,400), data bits, parity, stop bits, and data format without configuration.

NOTE: Higher rates are possible, but performance will vary as a function of baud rate and twisted pair cable length.

The receiver also buffers the proprietary input signal and sends it to another compatible MTP receiver or to a daisy chain of receivers.

NOTES:

•The transmitter provides pre-peaking, which boosts the signal before it is transmitted. The buffered output on the receiver does not provide any pre-peaking control. The total recommended distance (see the table on page 4) for an entire daisy chain is the same as for a single transmitter and receiver. The Pre-Peak switch on the transmitter has the same effect on the recommended transmission distance for a daisy chain as for a single transmitter and receiver.

•Up to eight receivers can be connected in series using the Buffered Output connectors, provided that the total distance from the twisted pair output of the transmitter to the last receiver in the chain does not exceed the recommended distance for the resolution being used.

The SEQ receiver also corrects the skew delay commonly encountered when CAT 5, 5e, or 6 cables are used for RGB video, component video, and S-video transmission.

NOTE: An SEQ receiver should not be necessary when Extron Enhanced Skew-Free AV UTP cable is used.

Each MTP transmitter and receiver model is shipped with an external desktop 12 VDC power supply that accepts 100 VAC to 240 VAC, 50-60 Hz input.

Twisted pair cable is smaller, lighter, more flexible, and less expensive than coaxial cable. Termination of the cable with RJ-45 connectors is simple, quick, and economical.

MTP 15HD RS Series • Introduction

MTP 15HD specifications

Extron Electronics is known for its innovative solutions in audio-visual technology, and the MTP 15HD stands out as a versatile and efficient solution for video signal distribution. The MTP 15HD is part of Extron’s series of Media Transport Products, designed specifically for applications that require high-definition video transmission over long distances.

One of the main features of the MTP 15HD is its ability to transmit HD video signals up to 1920x1200 resolution, ensuring stunning picture quality for professional environments. It supports various video formats, including RGBHV, component video, and composite video, allowing for compatibility with a wide range of devices. This versatility makes it ideal for use in educational institutions, corporate environments, and control rooms where flexibility is key.

Another notable technology employed in the MTP 15HD is its use of twisted pair cable, which facilitates long-distance transmission. By utilizing Extron’s proprietary HDMI technology, the MTP 15HD can deliver video signals up to 300 feet (91 meters) over a single CATx cable, minimizing signal degradation and ensuring reliable performance. This feature significantly reduces installation costs associated with traditional coaxial cabling methods.

The MTP 15HD also incorporates advanced signal processing technology, allowing it to automatically adjust to the signal quality, optimizing performance for the source device and the output display. This adaptive feature ensures that users experience the best possible video quality without manual intervention.

Another advantage of the MTP 15HD is its user-friendly design. The device is compact and rack-mountable, making it suitable for both permanent installations and portable applications. It also supports hot-swappable operation, allowing users to replace or add devices without interrupting the signal flow.

Overall, the Extron MTP 15HD stands as a robust solution for high-definition video signal distribution. Its combination of high-resolution support, extensive range capabilities, and versatile input options make it an essential component for any advanced audio-visual setup. Whether for corporate presentations, education, or broadcasting, the MTP 15HD enhances connectivity and delivers exceptional performance, embodying Extron's commitment to quality and innovation in the AV market.