Extron electronic MTP 15HD manual Receiver Rear Panel Features

Page 14

Receiver Rear Panel Features

Figure 6 shows an MTP RL 15HD RS receiver, which has all of the connectors and other features that are on either receiver in the MTP 15HD RS series.

5

MTP RL 15HD RS

BUFFERED

POWER INPUT OUTPUT

12V

.5A MAX

1 2 3

RS-232

Tx Rx G

OUTPUT

4

H SYNC + V SYNC + C SYNC SOG VIDEO END UNIT

ON

1 2 3 4 5 6

6

Figure 6. Receiver Rear Panel

APower connector — Plug the included external 12 VDC power supply into this 2-pole captive screw connector. Wire the connector as shown in figure 8 on page 12.

ATTENTION: Potential damage to property.

Before wiring the connector, read the notes, attentions, and warnings in the "Power Supply Wiring" section on page 12.

BInput connector — Connect one end of the twisted pair cable from the transmitter or from the buffered output connector of an RL receiver to this RJ-45 female connector.

CBuffered output connector — Connect one end of a twisted pair cable to this female RJ-45 connector. Connect the free end of the same TP cable from the receiver to the Input RJ-45 female connector on another receiver.

See "Twisted Pair Cable Termination" on page 13 to wire the RJ-45 connectors.

ATTENTION: Potential damage to property.

Do not connect these devices to a computer data or telecommunications network.

NOTES:

•The non-C7 transmitters and receivers will not work properly with STP201 or CAT 7 STP cable.

•The C7 transmitters and receivers will work properly only with STP201 or CAT 7 STP cable.

DOutput video connector — Connect a projector or other high resolution video device to this 15-pin HD connector.

ERS-232 connector — Connect a serial communications port to this 3.5 mm, 3-pole captive screw connector for bidirectional RS-232 communication. Wire the connector as shown in figure 5 on page 8.

NOTE: See D on page 8 before wiring the connector.

MTP 15HD RS Series • Installation and Operation

10

Page 13 Page 15
Image 14
Page 13 Page 15
Contents User Guide Safety Instructions English Specifications Availability FCC Class a NoticeContents About the MTP Transmitters and Receivers IntroductionAbout this Guide Twisted Pair Cable Advantages Transmission Distance MTP 15HD RS Series Introduction Pre-Installation RS-232 Jumper Installation OperationInstallation and Operation Overview InstallationFront Panel Features MTP Front PanelsMTP 15HD RS Series Installation and Operation Transmitter Rear Panel Features Transmitter Rear PanelMTP 15HD RS Series Installation and Operation Receiver Rear Panel Features Receiver Rear PanelReceiver DIP Switch Settings Power Supply Wiring Potential damage to propertyTwisted Pair Cable Termination Diagram Twisted Pair Cable TerminationNon-SEQ Receiver Skew Compensation Skew Delay CompensationSEQ Receiver Skew Compensation Recording a Display Edid Edid ConfigurationUsing a Pre-Programmed or User-Recorded Edid Reference Information Part Numbers, Optional Accessories, Cables, and ConnectorsOptional Accessories Part NumbersCables ConnectorsRJ-45 Connectors Under Desk and Furniture Mounting Tabletop PlacementMounting Rack MountingProjector Mounting Rack Mounting ProcedureBack of the Rack Mounting Procedure Extron Warranty
Related manuals
Manual 25 pages 58.81 Kb

MTP 15HD specifications

Extron Electronics is known for its innovative solutions in audio-visual technology, and the MTP 15HD stands out as a versatile and efficient solution for video signal distribution. The MTP 15HD is part of Extron’s series of Media Transport Products, designed specifically for applications that require high-definition video transmission over long distances.

One of the main features of the MTP 15HD is its ability to transmit HD video signals up to 1920x1200 resolution, ensuring stunning picture quality for professional environments. It supports various video formats, including RGBHV, component video, and composite video, allowing for compatibility with a wide range of devices. This versatility makes it ideal for use in educational institutions, corporate environments, and control rooms where flexibility is key.

Another notable technology employed in the MTP 15HD is its use of twisted pair cable, which facilitates long-distance transmission. By utilizing Extron’s proprietary HDMI technology, the MTP 15HD can deliver video signals up to 300 feet (91 meters) over a single CATx cable, minimizing signal degradation and ensuring reliable performance. This feature significantly reduces installation costs associated with traditional coaxial cabling methods.

The MTP 15HD also incorporates advanced signal processing technology, allowing it to automatically adjust to the signal quality, optimizing performance for the source device and the output display. This adaptive feature ensures that users experience the best possible video quality without manual intervention.

Another advantage of the MTP 15HD is its user-friendly design. The device is compact and rack-mountable, making it suitable for both permanent installations and portable applications. It also supports hot-swappable operation, allowing users to replace or add devices without interrupting the signal flow.

Overall, the Extron MTP 15HD stands as a robust solution for high-definition video signal distribution. Its combination of high-resolution support, extensive range capabilities, and versatile input options make it an essential component for any advanced audio-visual setup. Whether for corporate presentations, education, or broadcasting, the MTP 15HD enhances connectivity and delivers exceptional performance, embodying Extron's commitment to quality and innovation in the AV market.
Top Page Image Contents