Extron electronic MTP 15HD manual FCC Class a Notice, Specifications Availability

Page 3

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.This device may not cause harmful interference.

2.This device must accept any interference received, including interference that may cause undesired operation.

The Class A limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

NOTE: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to ensure compliance with FCC emissions limits.

For more information on safety guidelines, regulatory compliances, EMI/EMF compliance, accessibility, and related topics, click here.

Conventions Used in this Guide

In this user guide, the following are used:

WARNING: A warning indicates a situation that has the potential to result in death or severe injury.

ATTENTION: Attention indicates a situation that may damage or destroy the product or associated equipment.

NOTE: A note draws attention to important information.

Specifications Availability

Product specifications are available on the Extron website, www.extron.com.

Copyright

© 2012 Extron Electronics. All rights reserved.

Trademarks

All trademarks mentioned in this guide are the properties of their respective owners.

iii

Image 3
Contents User Guide Safety Instructions English FCC Class a Notice Specifications AvailabilityContents Introduction About this GuideAbout the MTP Transmitters and Receivers Twisted Pair Cable Advantages Transmission Distance MTP 15HD RS Series Introduction Installation Installation OperationInstallation and Operation Overview Pre-Installation RS-232 JumperMTP Front Panels Front Panel FeaturesMTP 15HD RS Series Installation and Operation Transmitter Rear Panel Transmitter Rear Panel FeaturesMTP 15HD RS Series Installation and Operation Receiver Rear Panel Receiver Rear Panel FeaturesReceiver DIP Switch Settings Potential damage to property Power Supply WiringTwisted Pair Cable Termination Twisted Pair Cable Termination DiagramSkew Delay Compensation SEQ Receiver Skew CompensationNon-SEQ Receiver Skew Compensation Edid Configuration Using a Pre-Programmed or User-Recorded EdidRecording a Display Edid Part Numbers Part Numbers, Optional Accessories, Cables, and ConnectorsOptional Accessories Reference InformationConnectors RJ-45 ConnectorsCables Rack Mounting Tabletop PlacementMounting Under Desk and Furniture MountingRack Mounting Procedure Back of the Rack Mounting ProcedureProjector Mounting Extron Warranty
Related manuals
Manual 25 pages 58.81 Kb

MTP 15HD specifications

Extron Electronics is known for its innovative solutions in audio-visual technology, and the MTP 15HD stands out as a versatile and efficient solution for video signal distribution. The MTP 15HD is part of Extron’s series of Media Transport Products, designed specifically for applications that require high-definition video transmission over long distances.

One of the main features of the MTP 15HD is its ability to transmit HD video signals up to 1920x1200 resolution, ensuring stunning picture quality for professional environments. It supports various video formats, including RGBHV, component video, and composite video, allowing for compatibility with a wide range of devices. This versatility makes it ideal for use in educational institutions, corporate environments, and control rooms where flexibility is key.

Another notable technology employed in the MTP 15HD is its use of twisted pair cable, which facilitates long-distance transmission. By utilizing Extron’s proprietary HDMI technology, the MTP 15HD can deliver video signals up to 300 feet (91 meters) over a single CATx cable, minimizing signal degradation and ensuring reliable performance. This feature significantly reduces installation costs associated with traditional coaxial cabling methods.

The MTP 15HD also incorporates advanced signal processing technology, allowing it to automatically adjust to the signal quality, optimizing performance for the source device and the output display. This adaptive feature ensures that users experience the best possible video quality without manual intervention.

Another advantage of the MTP 15HD is its user-friendly design. The device is compact and rack-mountable, making it suitable for both permanent installations and portable applications. It also supports hot-swappable operation, allowing users to replace or add devices without interrupting the signal flow.

Overall, the Extron MTP 15HD stands as a robust solution for high-definition video signal distribution. Its combination of high-resolution support, extensive range capabilities, and versatile input options make it an essential component for any advanced audio-visual setup. Whether for corporate presentations, education, or broadcasting, the MTP 15HD enhances connectivity and delivers exceptional performance, embodying Extron's commitment to quality and innovation in the AV market.