Hopper Switch

SERVICE (cont.)

P1933

FIG. 26 HOPPER SWITCH

Location:

The hopper switch is located under the hopper support panel.

Test Procedures:

1.Disconnect the dispenser from the power source.

2.Open the dispenser door and remove the hopper.

3.Manually engage and release the hopper switch actuator. The actuator must operate smoothly with- out binding at either end of its travel and an audible click must be detected near the mid point of travel.

If the actuator operates as described, proceed to #4. If the actuator does not operate as described, loosen the hopper switch mounting screws, realign the switch, and repeat the process. If the audible click cannot be detected, proceed to #4.

4.Disconnect the twelve pin connector (J1) from the control board.

5.Check continuity between pins 8 & 10 on the harness using an ohmmeter. Continuity must be present when the hopper is correctly installed. Continuity must not be present when the hopper is removed.

6.Reconnect the twelve pin connector (J1) to the control board.

If continuity is present as described, the hopper switch is operating properly.

If continuity is not present as described, proceed to #7.

7.Disconnect the wires from the hopper switch.

8.Check continuity between the N.O. and COM. termi- nals of the hopper switch using an ohmmeter. Continuity must be present when the actuator is engaged. Continuity must not be present when actuator is released.

If continuity is present as described, refer to wiring diagram and check the dispenser wiring harness.

If continuity is not present as described, replace the hopper switch.

Removal and Replacement:

1.Disconnect the dispenser from the power source.

2.Open the dispenser door and remove the hopper.

3.Remove the four #8-32 screws securing the hopper support panel.

4.Carefully lift the hopper support panel, remove the wires from the hopper switch, and remove the hopper support panel.

5.Noting the orientation of the switch, remove the two #4-40 screws, lockwashers and nuts securing the switch to the panel.

6.Attach the new switch to the panel taking care to orient it properly and secure with two #4-40 screws, lockwashers and nuts.

7.Manually engage and release the hopper switch actuator. The actuator must operate smoothly with- out binding at either end of its travel. If the actuator operates as described, proceed to #8. If the actua- tor does not operate as described, loosen the two screws and realign the switch and repeat the pro- cess.

8.Refer to Fig. 27 and reconnect the wires.

9.Install the hopper support panel and secure with four #8-32 screws.

GRN to Control Boad (J1-8)

RED/BLK to Control Board (J1-10)	P1904

FIG. 27 HOPPER SWITCH TERMINALS

29	29793.1 021202

dispenser specifications

The Bunn dispenser is a highly regarded name in the beverage service industry, known for its reliable coffee brewers, steeping equipment, and beverage dispensing solutions. These dispensers are designed with efficiency and quality in mind, making them a favorite in restaurants, cafes, and other foodservice establishments.

One of the main features of the Bunn dispenser is its rapid brewing capability. Utilizing a unique brewing system, Bunn dispensers can quickly brew large quantities of coffee, which is essential for high-demand environments. The machines are equipped with advanced heating technology that ensures water is brewed at the optimal temperature for extracting the best flavors from coffee grounds. This feature not only enhances the quality of the beverage but also significantly reduces waiting times for customers.

Another key characteristic of Bunn dispensers is their durability. Built with high-quality materials, these machines are designed to withstand the rigors of a busy kitchen environment. The robust construction ensures a long lifespan, minimizing the need for frequent repairs or replacements. Additionally, many models feature stainless steel components that are resistant to corrosion and easy to clean, maintaining hygiene standards while also looking professional.

Bunn dispensers are also known for their versatility. With a range of models available, including single and multi-hopper options, they can dispense various beverages, including coffee, tea, and iced drinks. This flexibility allows businesses to cater to different customer preferences without requiring multiple machines. Moreover, Bunn dispensers often come with programmable features, enabling users to customize brew strengths and volumes for optimal beverage consistency.

In terms of technology, Bunn has incorporated advanced digital controls and user interfaces in many of its models. These digital displays simplify operation, allowing staff to monitor brewing processes and receive alerts for maintenance requirements efficiently. Such technological integration enhances user experience and operational efficiency.

Energy efficiency is another consideration in the design of Bunn dispensers. Many models are equipped with energy-saving features, which help reduce power consumption during both operation and standby modes. This focus on sustainability not only lowers utility costs for businesses but also aligns with the growing consumer demand for environmentally responsible practices.

In conclusion, Bunn dispensers combine speed, durability, versatility, advanced technology, and energy efficiency, making them an excellent choice for any foodservice operation. Their ability to deliver high-quality beverages quickly and consistently makes them a pivotal asset for businesses aiming to provide an exceptional customer experience.