Coway CP-07BLO warranty Arsenic Facts

Page 27

•For parts and service availability, please contact your local dealer or Coway.

•This system is acceptable for treatment of influent concentrations of no more than 27 mg/L nitrate and 3 mg/L nitrite in combination measured as N and is certified for nitrate/nitrite reduction only for water supplies with a pressure of 2.8 kgf/cm2 (40 psi) or greater.

•A nitrate/nitrite sampling kit should be used to monitor the nitrate/nitrite levels in your product drinking water at least every six months. Kits maybe purchased from your local dealer or Coway.

•This system has been tested for the treatment of water containing pentavalent arsenic (also know as As(V), As(+5), or arsenate) at concentrations of 0.050 mg/L or less. This system reduces pentavalent arsenic, but may not remove other forms of arsenic. This system is to be used on water supplies containing a detectable free chlorine residual at the system inlet or on water supplies that have been demonstrated to contain only pentavalent arsenic. Treatment with chloramines (combined chlorine) is not sufficient to ensure complete conversion of trivalent arsenic to pentavalent arsenic. Please see the Arsenic Facts section of this Performance Data Sheet for further information.

•Efficiency rating means the percentage of the influent water to the system that is available to the user as reverse osmosis treated water under operating conditions that approximate typical daily usage.

•The product water should be tested every 6 months to ensure that the contaminants are being reduced effectively. Please contact your local dealer or Coway to initiate this service.

•This reverse osmosis system contains a replaceable treatment components, critical for the effective reduction of total dissolved solids and that product water shall be tested periodically to verify that the system is performing properly. Replacement of reverse osmosis component should be with one of identical specifications, as defined by the manufacturer, to assure the same efficiency and contaminant reduction performance.

•The estimated replacement time of filter, which is a consumable part, is not an indication of quality guarantee period, but it means the ideal time of filter replacement. Accordingly, the estimated time of filter replacement may be shortened in case it is used in an area of poor water quality.

Model of Filter

Type

Usable period (months)

COST US $

 

 

 

 

WJNF8-S

NEO-SENSE FILTER

6

7.84

 

 

 

 

WJMF8-20-S

RO MEMBRANE FILTER

20

60.92

 

 

 

 

WJIF8 –S

INNO SENSE FILTER

18

9.40

 

 

 

 

WJCC-02

CERAMIC FILTER

12

3.6

 

 

 

 

ARSENIC FACTS

Arsenic (abbreviated As) is found naturally in some well water. Arsenic in water has no color, taste or odor. It must be measured by a lab test. Public water utilities must have their water tested for arsenic. You can get the results from your water utility. If you have your own well, you can have the water tested. The local health department or the state environmental health agency can provide a list of certified labs. The cost is typically $15 to $30. Information about arsenic in water can be found on the Internet at the US Environmental Protection Agency website: www.epa.gov/safewater/arsenic.html

There are two forms of arsenic: pentavalent arsenic (also called As(V), As(+5), and arsenate) and trivalent arsenic (also called As(III), As(+3), and arsenite). In well water, arsenic may be pentavalent, trivalent, or a combination of both. Special sampling procedures are needed for a lab to determine what type and how much of each type of arsenic is in the water. Check with the labs in your area to see if they can provide this type of service.

Reverse osmosis (RO) water treatment systems do not remove trivalent arsenic from water very well. RO systems are very effective at removing pentavalent arsenic. A free chlorine residual will rapidly convert trivalent arsenic to pentavalent arsenic. Other water treatment chemicals such as ozone and potassium permanganate will also change trivalent arsenic to pentavalent arsenic. A combined chlorine residual (also called chloramine) may not convert all the trivalent arsenic. If you get your water from a public water utility, contact the utility to find out if free chlorine or combined chlorine is used in the water system.

The CP-07BLO system is designed to remove pentavalent arsenic. It will not convert trivalent arsenic to pentavalent arsenic. The system was tested in a lab. Under those conditions, the system reduced 0.050 mg/L pentavalent arsenic to 0.010 mg/L (ppm) (the USEPA standard for drinking water) or less. The performance of the system may be different at your installation. Have the treated water tested for arsenic to check if the system is working properly. The RO component of the CP-07BLO system must be replaced every 20 months to ensure the system will continue to remove pentavalent arsenic. The component identification and locations where you can purchase the component are listed in the installation/operation manual.

Others PERFORMANCE DATA BLOSHEET CP-07

26

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Water Filtration Device CP-07BLO Prevention function FeaturesPower saving mode using the light sensor Faucet pollution preventionDear Customers ContentsDo not connect and pull out the power plug repeatedly Safety InformationElectricity safety Do not pull the power cordInstallation safety Buck or the foreign body can be entered Operation safetyDo not repair, disassemble, or modify Clean after unpluggingOthers Do not use with waterRear Cooling Stopper Radiator Power cord OutletBlue InletOrangeParts Name Front5-step water filtering system CP-07BLO Water Filtration ProcessOpen the feed valve to supply water to the filtration system Connect the faucet with the adaptorPlease check before use Indication part/Operation part Operation / Indication PartOperation part To use the cold water modeHOW to USE To drink the cold waterTo drink the room water Follow the instruction for installation InstallationBe cautious  Water filtration device installation place After installing the water filtration system  Movement and installationStorage tank Cleaning MethodCleaning Method Gutter Gutter separation methodGutter assembling method  Filter Filter Replacement Filter replacement cycle  About filter replacement cycleFilter Replacement Method Driver Symptom Check Measures to take TroubleshootingProduct Water Filtration Device SpecificationCP-07BLO Water Flow DiagramGeneral Operating Information Brand LyonArsenic Facts Concentration 2 mg/L VOC Surrogate ClaimsVOCs Water Treatment Device Certificate NumberLimitations and Exclusions What This Warranty Does Not CoverWaiver Conditions of WarrantyObtaining Warranty Service and OWNER’S Duties Limitations on Implied Warranties001

CP-07BLO specifications

The Coway CP-07BLO is a sophisticated air purifier that epitomizes modern technology and design. This powerful appliance is engineered to improve indoor air quality, making it an essential addition to homes and offices alike. With its advanced features and cutting-edge technologies, the CP-07BLO stands out in a crowded marketplace.

One of the most notable features of the Coway CP-07BLO is its four-stage filtration system. This system includes a pre-filter, a deodorization filter, a HEPA filter, and an ionizer, each playing a pivotal role in capturing pollutants. The pre-filter captures larger particles like dust and pet hair, while the deodorization filter neutralizes unpleasant odors, creating a fresher atmosphere. The HEPA filter is capable of trapping 99.97% of airborne particles as small as 0.3 microns, which includes allergens like pollen and smoke. Lastly, the built-in ionizer enhances the purification process by releasing negative ions that attach to positively charged particles, causing them to clump together and fall out of the air.

The Coway CP-07BLO also boasts a sleek and modern design, making it an attractive addition to any room. Its compact size allows it to fit comfortably in tight spaces, while its stylish exterior complements various decor styles. The unit is lightweight and portable, making it easy to move from room to room according to your needs.

In terms of performance, the CP-07BLO is equipped with a smart air quality indicator. This feature provides real-time feedback on the air quality in your space, adjusting the purification levels automatically to ensure optimal air cleanliness without manual intervention. Additionally, the unit operates quietly, making it suitable for use in bedrooms and other noise-sensitive environments.

The Coway CP-07BLO is designed with energy efficiency in mind. It consumes low power, which helps to reduce electricity bills without compromising its performance. It also features an eco mode that intelligently adjusts the fan speed based on air quality, further conserving energy.

Overall, the Coway CP-07BLO is more than just an air purifier; it is a comprehensive solution for those seeking to enhance their indoor air quality. With its advanced filtration system, smart features, and user-friendly design, it is a powerful ally in the fight against indoor air pollution. Whether you're an allergy sufferer, a pet owner, or simply someone who values clean air, the Coway CP-07BLO is an excellent investment for healthier living.
Top Page Image Contents