Belshaw Brothers 10-Tray, 4-Tray manual Troubleshooting4, Error Codes for the BX Classic Oven

Troubleshooting4

The following pages contain troubleshooting/ fault analysis charts for the Classic convection oven.

Error Codes for the BX Classic Oven

Code	Possible Causes	What To Do
E01	Bake Data written to non-volatile	EEPROM memory is integrated onto the
	(EEPROM) was not correctly verified	microcontroller so this should be unlikely.
	as part of error checking.	Replace the controller.
E02	System read an out-of-range	“
	temperature value when retrieving bake	Any value above 250 C will cause this
		error. Indicated corruption of data.
	data from EEPROM.	Reset back temperature to below
		480“ F/250“ C.
E03	Thermocouple open circuit	Thermocouple or thermocouple wiring is
		bad.
		Check the thermocouple wiring. Replace
		as necessary

Belshaw Bros., Inc. š 1750 22nd Ave. S. š Seattle, WA 98144 š Phone 206-322-5474 š Fax 206-322- 5425

BX Classic Oven MN-1876EN 9