WARNING
Make sure water does not enter the control
panel or rear access panel.
WARNING
Do not remove the rear paneling inside the
oven. This allows access to the fan assembly and could cause injury.
Maintenance
Check for frayed or bare cables. The machine must not be used if there are frayed or bare cables.
Follow cleaning instructions exactly.
Check condition of the rubber door seal. Repair or replace if necessary.
If the light bulb burns out, use the following instructions to replace it.
a.Disconnect the oven from the main power supply and allow to cool.
b.Remove the glass front from the lamp unit.
c.Remove the bulb by unscrewing counterclockwise and replace with a new bulb.
d.Refit the glass front.
e.Reconnect the oven to the main power supply and test.
If the steaming operation deteriorates, clean the pipe aperture with a pin to remove any
Lubrication
This machine does not require special lubrication.
Belshaw Bros., Inc. 1750 22nd Ave. S. Seattle, WA 98144 Phone
BX Classic Oven | 7 |