Care and maintenance
Always disconnect the appliance from the power before any cleaning or maintenance.
As the icemaker has a stainless steel or enamel surface, you should use a nonabrasive cleaner. Any abrasive cleaner (including Cif) will scratch the surface and could erase the control panel markings. Stainless steel can be effectively cleaned by simply using a dilute solution of water and mild detergent and drying to a shine with a clean cloth.
Proprietary stainless steel cleaners are available. We recommend the CDA
You should remove and clean regularly the water tank, the ice compartment drawer and both sections of the drip tray.
Once cleaning is complete, reconnect the mains power supply.
If the appliance is not to be used for prolonged periods of time, you should empty, clean thoroughly and unplug the appliance.
To empty the icemaker, follow the steps below:
1.Press and hold button
and 
together and then press button 
. This will empty the water in the icemaker’s internal system. The display will show ICE OFF WATER EMPTY to confirm the icemaker’s internal system is empty.
2.Empty the ice from the ice compartment.
3.Place a jug under the water nozzle and press button
until no more water is dispensed.
4.To make sure the pipework is completely empty, you should unscrew the cap at the back, using a cup to catch the last of the water.
IMPORTANT:
Steam cleaners must not be used when cleaning this appliance.
Ensure that all parts are correctly replaced after cleaning before attempting to use the icemaker.