Inside of oven
The oven should always be cleaned after use when it has cooled down.
The cavity should be cleaned using a mild detergent solution and warm water. Suitable proprietary chemical cleaners may be used after first consult- ing with the manufacturers recommen- dations and testing a small sample of the oven cavity. Abrasive cleaning agents or scouring pads/cloths should not be used on the cavity surface.
NOTE: The manufacturers of this appli- ance will accept no responsibility for damage caused by chemical or abrasive cleaning.
Let the oven cool down and pay spe- cial attention no to touch the hot heating elements inside the oven cav- ity.
Fig. 25 |
Assembling and dismantling of the side runner frames
–Fit the side runner frames into the holes on the side walls inside the oven (Fig. 25).
–Slide the tray and rack into the run- ners (Fig. 26).
The rack must be fitted so that the safety catch, which stops it sliding out, faces the inside of the oven.
–To dismantle, operate in reverse order.
Fig. 26 |
28