CDA RC 9020 installation instructions For the Installer, Location

Page 30

FOR THE INSTALLER

Location

This cooker has class “2/1” overheating protection so that it can be installed next to a cabinet.

The appliance may be installed in a kitchen, Kitchen/diner or a bed sitting room, but not in a room or space containing a bath or a shower.

The appliance must not be installed in a bed-sitting room of less than 20 m3.

The appliance is designed and approved for domestic use only and should not be installed in a commercial, semi commercial or communal environment.

Your product will not be guaranteed if installed in any of the above environments and could affect any third party or public liability insurances you may have.

If the cooker is installed adjacent to furniture which is higher than the gas hob cook- top, a gap of at least 200 mm must be left between the side of the cooker and the fur- niture.

The furniture walls adjacent to the cooker must be made of material resistant to heat.

The veneered synthetic material and the glue used must be resistant to a temperature of 90°C in order to avoid ungluing or deformations.

The cooker may be located in a kitchen, a kitchen/diner or bed-sitting room but not in a room containing a bath or shower.

Curtains must not be fitted immediatly behind appliance or within 500 mm of the sides.

It is essential that the cooker is positioned as stated in Fig. 28.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Twin cavity Dual fuel cookers CDA Contents Introduction Assembling the backguardFeatures and technical data Gas burnersControl panel Control panel Controls descriptionElectronic programmer main oven only Electronic clock fig Electronic timerAltering the audible signal Normal cooking without the use of the programmerAutomatic oven cooking Semi-automatic cooking Electric ignition How to use the hob burnersHob burners Lighting of the hob burnersChoice of burner Correct use of triple-ring burnerHow to use the Multifunction main oven General featuresOperating principles Oven light Traditional convection cookingGrilling Defrosting frozen foodsHot air cooking Ventilated grill cooking Convection cooking with ventilationSterilization RegenerationSimultaneous cooking of different foods Grilling and au gratin RoastingUse of the grill How to use the Conventional oven Traditional grilling Rotisserie Use of the rotisserieFor your safety Do’s and do not’sDo’s and do not’s Important notes Flexible tube Care and maintenanceCleaning the hob Gas tapsEnamelled parts Changing the oven lightBurners Triple ring burnerRemoval of the inner glass door panel Storage compartmentInside of oven Assembling and dismantling of the side runner framesDoor assembly Removing the oven doorFor the Installer Location500 Fitting the adjustable feet Moving the cooker Levelling the cookerStability bracket Provison for ventilation Gas installation Important NoteInstallation to Natural Gas Gas connectionLeft gas Right gas Inlet pipe Important Prescriptions for GAS Connection Injectors replacement of top burners Conversion to Natural Gas or to LPGAdjusting of the minimum of the top burners Lubrication of the gas taps Table for the choice of the injectorsElectrical installation For your safety please read the following informationElectrical feeder cable connection Feeder cable section type H05RRFAppliance servicing Guarantee Limit of CoverPage RC 9020 .. cookers

RC 9020 specifications

The CDA RC 9020 is a remarkable freestanding wine cooler that captures the essence of elegance and functionality, catering to wine enthusiasts who value both aesthetics and performance. With a sleek, modern design, this unit combines innovative technologies and user-friendly features that enhance both the storage and enjoyment of wines.

One of the standout features of the CDA RC 9020 is its dual-zone temperature control. This functionality allows users to store different types of wines at their optimal temperatures, ensuring that reds and whites can be kept at the ideal conditions for serving. The upper zone typically operates between 5°C to 10°C, perfect for sparkling wines and whites, while the lower zone functions from 10°C to 18°C, catering to the preferred temperatures for reds.

The unit's shelving system is crafted from elegant wood, which not only provides a sturdy base for wine bottles but also adds a touch of sophistication. The racks are designed to hold standard wine bottles securely, minimizing movement and reducing the risk of sediment disturbance. The CDA RC 9020 can accommodate up to 20 bottles, making it a user-friendly choice for both casual drinkers and serious collectors.

Another crucial aspect of the CDA RC 9020 is its energy-efficient compressor cooling system. This technology ensures that the wine is stored at a consistent temperature while also minimizing energy consumption. Additionally, the low-vibration design of the compressor prevents disruption of the wine’s delicate aging process.

The wine cooler is equipped with UV-filtered glass doors, which protect the contents from harmful light exposure that can alter the taste and quality of the wine. This feature is complemented by a well-designed internal LED lighting system that not only enhances visibility but also showcases the wine collection beautifully.

Moreover, the CDA RC 9020 includes a digital temperature display and touch controls, allowing users to adjust settings easily and monitor the internal environment. The unit operates quietly, ensuring that it does not disrupt the household environment while still maintaining the perfect conditions for wine storage.

In conclusion, the CDA RC 9020 combines style, technology, and practicality, making it an exceptional choice for wine lovers looking to preserve their collection in optimal conditions. Its dual-zone feature, energy efficiency, UV protection, and user-friendly controls make it stand out in the market.
Top Page Image Contents