36
Installation "A" between Existing Side Cabinets (560 or 600 mm GAP) (figs. 28, 29, 30, 31)
–Mount the 2 (two) metal supports “B” (supplied with the appliance in a separate kit) as indicated in Figs. 29 or 32).
–Fig. 32 only - prepare 2 wood uprights “A” (width 20-50 mm, thickness 18 mm, length 650 mm); mount the 2 wood uprights “A” to the cabinet walls as indicated in figure.
–Build in the double oven making it slide on the metal supports “B”.
Installation "B" between Side Cabinets by Removing Provious Housing (figs. 31, 32)
–Remove previous housing.
–Mount the 2 (two) metal supports “B” (supplied with the appliance in a separate kit) as indicated in Fig. 32.
–Prepare 2 wood uprights “A” (width
–Build in the double oven making it slide on the metal supports “B”.
Installation “A”
560 mm Gap |
Fig. 28 |
560 mm Gap
min 570
(*)Measure calculated from the underneath of the worktop to the top support base of the “B” supports.
718
538
595
20
544
( * )
min720
B 560
B
42
WARNING !
VERY IMPORTANT The underside of the cabinet shall be opened to allow correct air circulation.
Support base
Fig. 29