GE 960 Series manual Performa 960 FA Level II Programming Parameters

Table 8 - Performa 960 FA Level II Programming Parameters

	Parameter		Range of Values	Minimum	Default	Units of Measure	Notes
Name		Description		Increments
P6		Refill controller	1 to 99	1	33		Must be set to 46 for Performa 960
							FA operation
P7		Regenerant draw	1 to 99	1	25		Select Regenerant Draw value from
		value					Table 9 and enter that number.
P8		Not used	NA	NA	NA	NA	NA
P9		Backwash time	3 to 30	1	14	Minutes	Skip this parameter to accept the
							default or enter a value.
P10		Slow Rinse time	8 to 125	1	40	Minutes	Skip this parameter to accept the
							default or enter a value.
P11		Fast Rinse time	2 to 19	1	4	Minutes	Skip this parameter to accept the
							default or enter a value.
							0 = U.S., 1 = Metric. Skip this
P12		Units of measure	0 to 1	1	0		parameter to accept U.S. or enter 1
							for Metric.
							0 = 12-hour clock, 1 = 24-hour
P13		Clock mode	0 to 1	1	0		clock. Skip this parameter for a 12-
							hour clock or enter 1 for a
							24-hour clock.
		Calendar					0 = no calendar override. Skip this
P14			0 to 30	1	0	Days	parameter for no calendar override
		override
							or enter a value.
							0 = variable reserve, 1 = fixed
							reserve, 2 = variable reserve with
P15		Reserve type	0 to 3	1	0		immediate regen, 3 = fixed reserve
							with immediate regen. Skip this
							parameter to accept the default or
							enter a different reserve type.
		Fixed reserve					Description depends on the value
							entered for P15. Skip this
P16		capacity or initial	0 to 70	1	30	Percent of capacity
							parameter to accept the default or
		average value					enter a different value.
P17		Operation type	0 to 2	1	2		2 = 5 cycle Cocurrent conditioner
							0 = none, 1 = Regenerant Dosage/
		Regen. Dosage/					Capacity change locked out. Skip
							this parameter to accept the
P18		Capacity change	0 to 1	1	0
							default or enter 1 to lock out
		lock out
							Regenerant Dosage/Capacity
							change.
P19		Factory defaults	0 to 3	1	99		Loads in factory default values. Do
							not change this parameter.

15