GAS & Electric Connection Instructions

INSTALLATION INSTRUCTIONS (Continued)

FRYER RESTRAINING DEVICE INSTALLATION INSTRUCTIONS

! WARNING

Fryers MUST have a movement- limiting (restraining cable) device installed to prevent tipping that causes splashing or spilling its HOT contents.

NOTE: Thismovement-limitingde- vice is to be furnished and in- stalled by the fryer’s installing contractor before the fryer is con- nected to the gas line at its desired location.

1.Install one restraining device connector into the structure wall directly behind the fryer’s desired location, as shown in Figure 2.

2.Install one restraining device connector on the rear panel of the fryer very close to the quick- disconnect device on the end of the fryer’s gas line.

NOTE: Avoid interfering with the lift mechanism, on AA models.

3.Attach one end of the restraining cable to the wall connector. Attach the other end to the fryer connector.

4.Confirm that the fryer cannot move far enough away from the wall to cause excessive move- ment of the flexible gas line or its associated connectors.

Installing your ANETS Fryer requires the fol- lowing procedure, after its legs or casters are pro- perly attached and it is in its desired location.

1.Ensure that the gas control valve knob in the fryer has its OFF position next to the valve mark.

2.Ensure that the gas supply inlet line valve is closed (handle crosswise to the line direction).

3.Ensure that the circuit breaker dedicated to this fryer is OFF and that all fryer controls are set to OFF.

4.Connect the ¾”gas supply line to the gas line adapter on the lower rear of the fryer.

! WARNING

DO NOT use a flame to check for leaks.

5.Open the gas supply line valve (handle in-linewith line direction); then, confirm that all gas supply line joints and couplings are free of leaks using soap suds or a leak-check solu- tion, after the fryer is in its desired location.

6.Plug the fryer’s electric power cord plug into the receptacle specified for this fryer. Switch the circuit breaker to ON.

7.Refer to Fryer Operating Instructions to

begin using your ANETS Fryer.

MX-14-2AA, MX-7A, MX-14-2E, MX-14AA, MX-14E specifications

Anetsberger Brothers is renowned in the world of technology for their innovative and high-quality products, among which the MX series stands out. The MX-14-2AA, MX-7E, MX-7A, MX-14AA, and MX-14-2E models are prime examples of their commitment to excellence.

The MX-14-2AA is designed for intense usability with a focus on performance. Its robust construction ensures durability while providing excellent functionality in various environments. This model features an advanced control interface, allowing users to adjust settings with precision. Its energy-efficient design not only minimizes operational costs but also reduces the carbon footprint, showcasing Anetsberger Brothers' commitment to sustainability.

The MX-7E emphasizes versatility and ease of use. It is equipped with a user-friendly control panel that facilitates quick adjustments, making it suitable for both novice and experienced users. The MX-7E also incorporates cutting-edge technology for enhanced productivity, ensuring that tasks are completed swiftly without compromising on quality.

The MX-7A model takes a step further by integrating innovative features that optimize performance. With its superior thermal control system, users can expect consistent results, making it ideal for commercial applications where reliability is paramount. Additionally, the MX-7A incorporates smart technology to monitor usage patterns, providing insights that help in maintaining efficiency and reducing waste.

For those seeking a combination of power and efficiency, the MX-14AA is an outstanding choice. This model boasts high output capabilities, making it ideal for large-scale operations. It is constructed with advanced materials that enhance heat retention, ensuring that it meets the demands of high-traffic environments. Furthermore, the MX-14AA features an intuitive interface that simplifies operation and minimizes training time.

Lastly, the MX-14-2E is engineered for robust performance with a focus on user-friendly design. It comes with dual controls that allow for independent operation, making it perfect for multitasking. The MX-14-2E also benefits from intelligent diagnostic systems that help detect maintenance needs before they become problems, ensuring longevity and reliability.

In summary, the Anetsberger Brothers MX series represents the pinnacle of engineering excellence, combining advanced features with practical usability. Each model is tailored to meet the diverse needs of users while promoting efficiency, sustainability, and ease of operation, making them a valuable addition to any professional setting.