Fryer Troubleshooting Guide

All service (repairs or part replacement) must be performed by a qualified Service Agency.

PROBLEM	CAUSE	REMEDY

Pilot (piezo-electric)	1. Electrode of igniter out of position or	1. Move electrode within 3/16” of
pushbutton igniter does	dirty/sooty electrode.	pilot burner tip. Clean the
not light the pilot flame.		electrode.
	2. Loose spark wire; loose igniter nut.	2. Check spark wire connection at
		the igniter nut and make sure
		the connection is tight.
	3. Piezo-electric igniter does not generate a	3. Replace igniter mechanism
	spark.	(portion with pushbutton).

Pilot flame does not	1. Dirty/sooty pilot burner.	1. Clean the pilot burner. Perform
stay lighted.		the Lighting Procedure.
	2. Low gas supply pressure [less than 6”	2. Measure the gas supply pres-
	W.C. for natural gas; (11” W.C. for pro-	sure.
	pane) when all other gas-powered equip-	Contact your local gas supplier
	ment is operating].	to obtain adequate gas supply
		pressure.
	3. Pilot flame too small to heat thermo-	3. Adjust the pilot valve (part of
	couple.	the gas control valve) to in-
		crease the flame size: Un-
		screw and retain the slotted
		threaded cover; turn the pilot
		valve adjustment screw two
		turns counterclockwise;
		reinstall the threaded cover.
	4. Pilot flame ‘wavering’ (being blown about	4. Block or redirect the draft, to
	by a draft).	keep the flame burning steadily.
	5. Improper thermocouple output voltage	5. Replace the thermocouple.
	(must be at least 10 millivolts, measured at
	the thermocouple junction block).
	6. High-limit thermostat problem has shut off	6. Check for, and repair, any dam-
	the gas.	aged high-limit thermostat wir-
		ing. Test the high-limit thermo-
		stat by disconnecting the ther-
		mocouple at the gas control
		valve. Also, disconnect the red
		wires to the high-limit thermo-
		stat from the gas control valve.
		Reconnect the thermocouple;
		then, perform the Lighting Pro-
		cedure, to check whether the
		pilot flame lights. If the pilot

MX-14-2AA, MX-7A, MX-14-2E, MX-14AA, MX-14E specifications

Anetsberger Brothers is renowned in the world of technology for their innovative and high-quality products, among which the MX series stands out. The MX-14-2AA, MX-7E, MX-7A, MX-14AA, and MX-14-2E models are prime examples of their commitment to excellence.

The MX-14-2AA is designed for intense usability with a focus on performance. Its robust construction ensures durability while providing excellent functionality in various environments. This model features an advanced control interface, allowing users to adjust settings with precision. Its energy-efficient design not only minimizes operational costs but also reduces the carbon footprint, showcasing Anetsberger Brothers' commitment to sustainability.

The MX-7E emphasizes versatility and ease of use. It is equipped with a user-friendly control panel that facilitates quick adjustments, making it suitable for both novice and experienced users. The MX-7E also incorporates cutting-edge technology for enhanced productivity, ensuring that tasks are completed swiftly without compromising on quality.

The MX-7A model takes a step further by integrating innovative features that optimize performance. With its superior thermal control system, users can expect consistent results, making it ideal for commercial applications where reliability is paramount. Additionally, the MX-7A incorporates smart technology to monitor usage patterns, providing insights that help in maintaining efficiency and reducing waste.

For those seeking a combination of power and efficiency, the MX-14AA is an outstanding choice. This model boasts high output capabilities, making it ideal for large-scale operations. It is constructed with advanced materials that enhance heat retention, ensuring that it meets the demands of high-traffic environments. Furthermore, the MX-14AA features an intuitive interface that simplifies operation and minimizes training time.

Lastly, the MX-14-2E is engineered for robust performance with a focus on user-friendly design. It comes with dual controls that allow for independent operation, making it perfect for multitasking. The MX-14-2E also benefits from intelligent diagnostic systems that help detect maintenance needs before they become problems, ensuring longevity and reliability.

In summary, the Anetsberger Brothers MX series represents the pinnacle of engineering excellence, combining advanced features with practical usability. Each model is tailored to meet the diverse needs of users while promoting efficiency, sustainability, and ease of operation, making them a valuable addition to any professional setting.

FRYER TROUBLESHOOTING GUIDE

PROBLEM

CAUSE

REMEDY

MX-14-2AA, MX-7A, MX-14-2E, MX-14AA, MX-14E specifications