Lighting Procedure

FRYER OPERATING INSTRUCTIONS (Continued)

Normal operation of an ANETS Fryer requires that the kettle is filled with liquid shortening above the lower indent level, marked on the rear of the kettle, before lighting the fryer’s pilot and turning on the main burner.

CAUTION: Shortening MUST be in liquid form to avoid scorching or discoloration and possible damage to the kettle. Damage caused by melting solid shortening will NOT be covered by the warranty.

NOTE: The gas line of a new fryer installation may contain a considerable amount of air which will hinder immediate lighting. You may have to press down the control knob for as long as several minutes until the pilot flame burns steadily.

1.Switch the circuit breaker controlling electric power to the fryer to ON.

2.Ensure that the fryer’s thermostat knob is set to OFF.

3.Open the gas supply line inlet valve to the fryer by aligning the gas valve handle with the gas line piping.

4.Open the front door and move the right pilot viewing/lighting port cover aside.

5.Turn the gas control valve knob to align the PILOT setting with the valve mark. Figure 6 shows the possible control knob positions.

6.Press, and hold down, the gas control knob to allow pilot gas to flow. Push the spark igniter pushbutton several times, until the pilot flame lights. Continue holding down the con- trol knob for at least 30 seconds until the pilot flame burns steadily, without going out.

NOTE: A match may also be used to light the pilot flame.

7.Release the control knob and observe that the pilot flame remains lighted. Close the right pilot viewing/lighting port.

8.Light the left pilot flame by opening the left pilot viewing/lighting port and applying a match to ignite the pilot flame. Close the left pilot viewing/lighting port.

!	CAUTION: Ensure that both pilot
	viewing/lighting ports are closed, to
	prevent excessive heat from damag-
	ing the gas controls.

9.Turn the gas control valve knob to align the ON setting with the valve mark.

10.Close the front door and switch the fryer POWER switch ON.

NOTE: A fryer equipped with built-in fil- tering system (Filtronic or Filter Mate) requires the front door to be closed before switching the POWER switch to ON.

11.Turn the thermostat knob to the desired temperature.

Valve				Valve			Valve
Mark				Mark			Mark
P	L	OT					ON
I	L				T
I				O	T
OFF			ON	O			ON		OFF
OFF			ON	L		OFF	ON		OFF
						OFF			O		P
				P							P
				I							I
								T		L	I
										L

OFF				PILOT			ON

Figure 6. Gas Control Valve & Knob Positions

MX-14-2AA, MX-7A, MX-14-2E, MX-14AA, MX-14E specifications

Anetsberger Brothers is renowned in the world of technology for their innovative and high-quality products, among which the MX series stands out. The MX-14-2AA, MX-7E, MX-7A, MX-14AA, and MX-14-2E models are prime examples of their commitment to excellence.

The MX-14-2AA is designed for intense usability with a focus on performance. Its robust construction ensures durability while providing excellent functionality in various environments. This model features an advanced control interface, allowing users to adjust settings with precision. Its energy-efficient design not only minimizes operational costs but also reduces the carbon footprint, showcasing Anetsberger Brothers' commitment to sustainability.

The MX-7E emphasizes versatility and ease of use. It is equipped with a user-friendly control panel that facilitates quick adjustments, making it suitable for both novice and experienced users. The MX-7E also incorporates cutting-edge technology for enhanced productivity, ensuring that tasks are completed swiftly without compromising on quality.

The MX-7A model takes a step further by integrating innovative features that optimize performance. With its superior thermal control system, users can expect consistent results, making it ideal for commercial applications where reliability is paramount. Additionally, the MX-7A incorporates smart technology to monitor usage patterns, providing insights that help in maintaining efficiency and reducing waste.

For those seeking a combination of power and efficiency, the MX-14AA is an outstanding choice. This model boasts high output capabilities, making it ideal for large-scale operations. It is constructed with advanced materials that enhance heat retention, ensuring that it meets the demands of high-traffic environments. Furthermore, the MX-14AA features an intuitive interface that simplifies operation and minimizes training time.

Lastly, the MX-14-2E is engineered for robust performance with a focus on user-friendly design. It comes with dual controls that allow for independent operation, making it perfect for multitasking. The MX-14-2E also benefits from intelligent diagnostic systems that help detect maintenance needs before they become problems, ensuring longevity and reliability.

In summary, the Anetsberger Brothers MX series represents the pinnacle of engineering excellence, combining advanced features with practical usability. Each model is tailored to meet the diverse needs of users while promoting efficiency, sustainability, and ease of operation, making them a valuable addition to any professional setting.