Behringer V-AMP2 user manual Installation, Audio connections

Page 22

V-AMP 2

7. INSTALLATION

7.1 Audio connections

The input of your BEHRINGER V-AMP 2 is a mono 1/4" jack. The Line Out, Aux In and headphones outputs are stereo 1/4" jacks. The Line Out outputs work with both balanced and unbalanced connections.

Fig. 7.1: Comparison of different plug types

Fig. 7.2: Wiring of a stereo headphones 1/4" plug

22	7. INSTALLATION

Image 22

Contents AMP Safety Instructions Foreword AMP Table of Contents Introduction New functions of the V-AMPSerial number Before you beginControl elements User interfaceMaster control determines the overall volume of the V-AMP Connections on the V-AMP 2 side panel Connections on the V-AMP 2 side panelExamples of USE/CONFIGURATIONS Line OUT L Line OUT RSelecting Configuration modes For this application please select Configuration mode S1Recording For this application please select Configuration mode S2Live set-up with an external guitar amp AMP 2 Presets Calling up presetsEditing presets Storing presetsAMP/SPEAKER Simulation Restoring all factory-programmed presetsAmp descriptions AMP Speaker descriptions Cabinets Effects ProcessorEffect Modulation effects Reverb and delay algorithms Effect descriptions Combinations of effect algorithms multi-effects programsSpecial effects Separate reverb effectReverb Reverb Type Quality Setting reference pitch a Tuning your guitarTuner Installation Audio connectionsMidi connections Sending/receiving MIDI-Sysex dataMidi implementation Midi Implementation Chart AppendixDefault cabinets/amp models 1st level name Default cabinet simulation 2nd level nameSpecifications Audio InputsWarranty § 1 Warranty CARD/ONLINE Registration § 2 Warranty