Panels and
Cabling
This section discusses the MPA 152 Plus rear panel features and cabling.
MPA 152 Plus Rear Panel Features
The rear panel of the MPA 152 Plus (shown in figure 2 below) allows the user to connect power (see below), audio input (see page 6), remote control (see page 7), and audio output (see page 9).
MPA 152 Plus
INPUTS
POWER 12V
0.7A MAX
L R
1 2
WIRING | OUTPUT |
8Ω / 4Ω |
|
CLASS 2 |
|
L | R |
L | R | V | C | G | REMOTE |
| |||||
|
| 10V |
| 50mA |
|
3 4 5 6
Figure 2. MPA 152 Plus Rear Panel Features
Power Connector
APower connector — The MPA 152 Plus ships with the Extron 24 watt PS 1220 desktop power supply.
ATTENTION: When the PS 1220 power supply is connected to the
MPA 152 Plus, it must not be shared with any other devices.
Connect one end of the DC power cord to one of the two pole, 3.5 mm captive screw outlets on the power supply. Connect the other end into the power receptacle on the rear panel of the amplifier, as shown in figure 3 on the following page. The power cord connectors are correctly wired when shipped.
MPA 152 Plus • Panels and Cabling | 4 |