Extron electronic MPA 152 PLUS manual UL Guidelines for Rack Mounting

Page 20
Mounting

Mounting

This section provides information about the mounting options for the MPA 152 Plus.

Rack Mounting

UL Guidelines for Rack Mounting

The following Underwriters Laboratories (UL) guidelines are relevant to the safe installation of this product in a rack:

1.Elevated operating ambient temperature — If the unit is installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient temperature. Therefore, install the equipment in an environment compatible with the maximum ambient temperature (TMA: +122 °F, +50 °C) specified by Extron.

2.Reduced air flow — Install the equipment in the rack so that the equipment gets adequate air flow for safe operation.

3.Mechanical loading — Mount the equipment in the rack so that uneven mechanical loading does not create a hazardous condition.

4.Circuit overloading — Connect the equipment to the supply circuit and consider the effect that circuit overloading might have on overcurrent protection and supply wiring. Appropriate consideration of the equipment nameplate ratings should be used when addressing this concern.

5.Reliable earthing (grounding) — Maintain reliable grounding of rack‑mounted equipment. Pay particular attention to supply connections other than direct connections to the branch circuit (such as the use of power strips).

MPA 152 Plus • Mounting

14

Image 20
Contents MPA 152 Plus ENERGY STAR Qualified Stereo Mini Power AmplifierUser Guide AudioSafety Instructions Safety Instructions EnglishInstructions de sécurité Français Sicherheitsanweisungen DeutschFCC Class B Notice Regulatory Compliance Guide on the Extron websiteNotifications Specifications AvailabilityConventions Used in this Guide Contents MPA 152 Plus Contents Important Safety Instructions Important Safety InstructionsAbout the MPA 152 Plus MPA 152 Plus Features IntroductionMPA 152 Plus Introduction MPA 152 Plus FeaturesAbout the MPA 152 Plus MPA 152 Plus Introduction Panels and Cabling MPA 152 Plus Rear Panel FeaturesPower Connector Figure 3. Power Connector MPA 152 Plus Panels and CablingAudio Inputs Figure 5. Remote Control Wiring Remote ControlWiring for remote control Ground to ground G Vol/Mute to C 10 V to Audio Output Figure 7. MPA 152 Plus Summing DiagramSetup and Operation Front Panel Features and OperationSetting Input Level Front Panel Features and OperationRemote Control Options Setting Bass and TrebleDefeating the Auto Power-downTimer Troubleshooting Amplifier Fails to ExitStandby Mode Promptly Amplifier Enters Standby Mode Too EarlyUL Guidelines for Rack Mounting MountingRack Mounting Back of the Rack Mounting Rack Mounting ProcedureOther Mounting Options Extron Warranty
Related manuals
Manual 2 pages 53.4 Kb