To regulate multiple amplifiers with a single volume controller, follow these instructions:
1.Attach all three pins of the volume controller to the corresponding pins on the first MPA 152 Plus unit only:
•Ground () to ground (G)
•Vol/Mute to C
•10 V to V.
2.Use jumper wires to connect the C (Volume and Mute) pins of the first amplifier and each successive amplifier.
3.Use jumper wires to connect the ground pins of the first amplifier and each successive amplifier.
VOL/MUTE |
10V |
Extron
VCM 100 AAP
Extron
MPA 152 Plus
Daisy Chain
V | C | G |
10V |
| 50mA |
V | C | G |
10V |
| 50mA |
V | C | G |
10V |
| 50mA |
Figure 6. Regulating Multiple Amplifiers with a Single Volume Controller
NOTE: The 10V pin of the volume controller connects to the first MPA 152 Plus only. There are no jumper wires linking it to subsequent amplifiers.
MPA 152 Plus • Panels and Cabling | 8 |