DVI DA Plus Series Features

EDID Minder — The EDID Minder maintains continuous EDID (Extended Display Identification Data) communication with the attached source. This ensures that the DVI source powers up correctly and maintains a proper video output, even if the display is off.

High Resolution DVI-D input — The distribution amplifiers accept one single link DVI-D input, with a resolution range up to 1920 x 1200 or 1080p @ 60 Hz.

Input Equalization — Input Equalization (EQ) conditions the input signals to ensure the integrity of the signals delivered to the output devices.

DVI-D outputs — The units distribute four (DVI DA4 Plus), six (DVI DA6 Plus), or eight (DVI DA8 Plus) single link DVI-D output signals simultaneously, at resolutions up to 1920 x 1200 or 1080p @ 60 Hz.

NThe actual signal transmission distance can vary greatly and depends on signal resolution, cable type, cable quality, graphics card and the display used in the system.

External power supply — All three models are powered by external 12 VDC power supply (provided with the units).

Power on Pin 14 — The distribution amplifiers are able to provide a 5 VDC (250 mA) output.

Front Panel Indicator LED — The LED light on the front panel provides feedback about power status and whether an input signal is detected.

Versatile mounting options — All three units can be mounted in a rack, under a desk or set on a tabletop.

DVI DA Plus Series • Introduction

1-3