Rack mounting the DVI DA4 Plus

5.Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted equipment. Pay particular attention to supply connections other than direct connections to the branch circuit (such as the use of power strips).

The DVI DA4 Plus can be mounted on the following (optional) rack shelves:

•RSF 123 (3.5" deep, 1U rack shelf kit: part # 60-190-20)

•RSB 123 (3.5" deep, 1U basic rack shelf: part # 60-604-20)

•RSU 126 (6" deep, 1U rack shelf kit: part # 60-190-10)

•RSB 126 (6" deep, 1U basic rack shelf: part # 60-604-10)

•RSU 129 (9.5" deep, 1U rack shelf kit: part # 60-190-01)

•RSB 129 (9.5" deep, 1U basic rack shelf: part # 60-604-01) To mount the units, follow these instructions:

1.Remove the rubber feet if these have been installed on the bottom of the unit.

2.Align the unit on the shelf and secure it to the shelf with two 4-40 x 3/16" screws in diagonally opposite corners (see the figure below).

3.Install false faceplate(s) or other unit(s) to the rack shelf.

4.Attach the shelf to the rack with the four provided 10-32 x 3/4" bolts.

1U Universal Rack Shelf

1/2 Rack Width Front False

Faceplate

Front false faceplate uses 2 screws.

Use 2 mounting holes on opposite corners.

(2)4-40 x 3/16" Screws

Rack mounting the DVI DA4 Plus

DVI DA Plus Series • Installation and Operation

2-3