Extron electronic DVI DA8 Plus Quick Start Guide -­ DVI DA Plus Series, Connect Power Cables

Quick Start Guide —­ DVI DA Plus Series

To install, connect cables, and operate any of the DVI DA Plus Series distribution amplifiers, follow these steps:

Step 1: Install

Install the distribution amplifier on a desk, under a desk, or in a rack (see page 2-2).

Step 2: Connect Power Cables

Connect the 12 VDC power supply (provided with the unit) to the unit's power receptacle, using the two pole, 3.5mm captive screw connector (see page 2-8).

POWER 12V

1.0A MAX

Back Panel Power Receptacle

DC Power Cord

Captive Screw Connector

Ground +12 VDC

External

Power Supply

(12 VDC, 2 A )

AC Power Cord

The external power supply in the illustration above (12 VDC, 2A) is for use with the DVI DA4 Plus. The DVI DA6 Plus and DVI DA8 Plus use a 12 VDC, 3A external power supply.

DVI DA Plus Series • Quick Start Guide QS-1