Installation and Operation, cont’d
Rack mounting the DVI DA6 Plus and DVI DA8 Plus
The DVI DA6 Plus and DVI DA8 Plus distribution amplifiers can be mounted using the Extron MBD 149 rack mount kit (provided) as follows:
1.Remove rubber feet if these have been installed on the bottom of the unit.
2.Secure one bracket to each side of the distribution amplifier with the provided bracket mounting screws (four #8 screws for each bracket — see the figure below).
MBD 149 Bracket
FRONT
Rack mounting screws
Bracket mounting screws
Rack mounting the DVI DA6 Plus or DVI DA8 Plus
3.Align the holes in the mounting brackets with holes in the rack and secure the unit with brackets to the rack using the four